Eiswolf 2 Rx7900xtx tiny bubbles

[Ryzen3483X]

Hi Alphacool mates !

I just finish to mount the AIO , it fits perfect and everything is ok, temp is amazing , hotspot is 64° max, was 90/95 before. I just want to know if it's ok to have many tiny bubbles on the water block, pump is at 100% in-game, no suspect noise, rad is front intake with hoses on the bottom, is it ok to have these bubbles? I tilt the cas in all the directions but bubbles here .....



Thank you in advance, and the AIO is amazing !

Cheers
Philippe
(French , sorry for my English)

 

[Luckystricker]

Hi @Ryzen3483X

The small bubbles shouldn't be a problem. You can try lightly tapping the spots on the radiator (like snapping your fingers) so that they loosen and are drawn into the radiator by the flow of water. There has to be some air in the circuit to ensure pressure equalization at different temperatures.

Best Regards

 

[Ryzen3483X]

Hi @Ryzen3483X

The small bubbles shouldn't be a problem. You can try lightly tapping the spots on the radiator (like snapping your fingers) so that they loosen and are drawn into the radiator by the flow of water. There has to be some air in the circuit to ensure pressure equalization at different temperatures.

Best Regards

Hi Lucky Striker, and thank's for the advice, i will try it !
have a nice day

 

[Luckystricker]

Hi @Ryzen3483X

Your Welcome

 

[Ryzen3483X]

Hi @Ryzen3483X

Your Welcome

Hi Lucky ,

your solution worked but temporarily, today the bubbles came back, just tiny bubbles, I hope it's normal! Have a good day !

 

[IcyStorm]

That is ok dude!
P.s that bubble is your new spiritual animal, it will not go away! : D