indyJ
New member
Hello.
I have an AMD 9950X on a Asus ProArt Mobo, an AMD 6950XT + RTX 5070 TI, 128 GB of RAM and 9 TB worth of SSDs (I put these here just to piss off Sam Altman
) in a Fractal Torrent Mid Tower. See picture attached (and don`t mind the dust).
The 6950XT is sandwiched between the Noctua NH-D15 cooler and the 5070 TI and it is choked pretty badly.
I have never water cooled PCs, but I have been building my own PCs for the past 25+ years.
I am looking to cool:
9950X with a Mycro Direct-Die PRO V1 from Thermal Grizzly that I already have brand new. The 9950X is already delidded and has the NH-D15 sitting on its die with the dedicated Noctua/Thermal Grizzly adapter.
+
The MSI GeForce RTX™ 5070 Ti 16G VENTUS 3X OC (V531-092R) --> using the 10248
both on the same loop. I will not be cooling the 6950XT.
I would like to:
- put a radiator in front of the case in between the 2 x 180mm Fractal fans and the GPU, I have a clearance of ~90mm there. I would use the 180mm radiator just to fully utilize those fans. What say you?
- have a big external radiator as well. I`m looking for the optimal thickness vs size vs heat dissipation option. Since it`s external, size doesn`t matter, I will frankenstein it to the desk to have it stand up straight, I do have the space for it.
- a pump that I think I would attach in front of the 140mm poop-colour Noctua exhaust fan (same place where the Noctua NH-D15 is standing right now). A pump with reservoir I guess?
- have reliable/best "quick disconnects" for individual components so that I can easily run maintenance and swap components if need be.
- I do not know which is the optimal tube thickness and ...type of tube?, please tell me.
- do I require extra fittings?
- do I need a water temp sensor and/or flow meter?
I don`t care about RGB or coolant colour nonsense. I do care about silence and efficiency
.
I thank you
I have an AMD 9950X on a Asus ProArt Mobo, an AMD 6950XT + RTX 5070 TI, 128 GB of RAM and 9 TB worth of SSDs (I put these here just to piss off Sam Altman
The 6950XT is sandwiched between the Noctua NH-D15 cooler and the 5070 TI and it is choked pretty badly.
I have never water cooled PCs, but I have been building my own PCs for the past 25+ years.
I am looking to cool:
9950X with a Mycro Direct-Die PRO V1 from Thermal Grizzly that I already have brand new. The 9950X is already delidded and has the NH-D15 sitting on its die with the dedicated Noctua/Thermal Grizzly adapter.
+
The MSI GeForce RTX™ 5070 Ti 16G VENTUS 3X OC (V531-092R) --> using the 10248
both on the same loop. I will not be cooling the 6950XT.
I would like to:
- put a radiator in front of the case in between the 2 x 180mm Fractal fans and the GPU, I have a clearance of ~90mm there. I would use the 180mm radiator just to fully utilize those fans. What say you?
- have a big external radiator as well. I`m looking for the optimal thickness vs size vs heat dissipation option. Since it`s external, size doesn`t matter, I will frankenstein it to the desk to have it stand up straight, I do have the space for it.
- a pump that I think I would attach in front of the 140mm poop-colour Noctua exhaust fan (same place where the Noctua NH-D15 is standing right now). A pump with reservoir I guess?
- have reliable/best "quick disconnects" for individual components so that I can easily run maintenance and swap components if need be.
- I do not know which is the optimal tube thickness and ...type of tube?, please tell me.
- do I require extra fittings?
- do I need a water temp sensor and/or flow meter?
I don`t care about RGB or coolant colour nonsense. I do care about silence and efficiency
I thank you