jesalr
New member
Hi, I picked up an Eiswolf 2, but the only orientation it will fit in my case is with the radiator on the front with the tubes at the bottom. Because of the PSU shroud, this causes the tubes then bend and pinch really poorly at the entrance to the radiator. I want to replace the tubes from the radiator to the quick couple with a set that have a 90 degree angle on them (https://www.alphacool.com/shop/aios...baer-tpv-extension-set-900-tubes-and-fittings).
The issue is that, when removing the current tubes, the G1/4 fitting that is attached to the radiator won’t come loose. Could you advise me on how to remove them?
Image of the fittings that can’t be removed:
The issue is that, when removing the current tubes, the G1/4 fitting that is attached to the radiator won’t come loose. Could you advise me on how to remove them?
Image of the fittings that can’t be removed: