GPU waterblock for Palit GeoForce RTX 5070 Infinite 3
- Thread starter w_o_t_q
- Start date
I found that this will work: https://www.corsair.com/us/en/explo...ybrid-50-series-water-block-gpu-compatibility. When I disassemble a card before installing the Corsair block, I can add pictures of the PCB in this thread. Maybe the existing 5070 GPU block might work on this card as well, and others can use it.
You’re welcome to do that. But just as a little food for thought, take a closer look at the Corsair cooler, especially what it cools and what it doesn’t cool. It only cools the GPU and VRAM. No voltage regulators or other components that also need cooling.
Good luck with that.
Good luck with that.
Just got the Corsair block. It is a hybrid one. GPU/RAM water-cooled, and air-cooled other PCB elements (See the slits in the second picture; this channel pushes air from the front ventilator against PCB elements). Right now, wait for other components to start building. Corsair hub to run the ventilator and some missing pieces for the custom loop, which will get some upgrades and repairs. Strongly suggest thinking about adding a similar solution to increase coverage of cards and increase availability, maybe even with multiple cover colors -> black and white. The only downside right now Corsair has only a black version for these cards(50 series), unlike the previous gen cards has an optional version in white.
