luisechenique114
New member
Hello, I live in Peru (south america), recently I received a GPU waterblock for my 3080 aorus master from Performance PCs.com, however, while installing it to my current loop, I noticed the coolant could not flow through it, after several hours of troubleshooting, I removed the GPU block and tested it with a compressed air leak tester from EKWB, just to see how water would behave, but air won't pass through either, even with outlet ports open. I wondered what can I do to fix this? Is my unit a bad one? I would really appreciate your help.
Loop is working just fine without the GPU block, I even tested the GPU block with a rad only without positive results.
As you can see in the image, outlet ports are fully opened, however, the leak tester is not losing pressure, air won't flow.
Loop is working just fine without the GPU block, I even tested the GPU block with a rad only without positive results.
As you can see in the image, outlet ports are fully opened, however, the leak tester is not losing pressure, air won't flow.
Last edited: