Help with ordering two 5090 cards

S

silentcloud

New member
Good afternoon, everyone. I need a list of what I need to buy for my PC:

- Silverstone RM52 case

- Palit RTX 5090 Gamerock OC (x2!!!)

- ProArt x870E Creator Wifi motherboard

- Ryzen 9950X 3D CPU

I can’t find any information on the best way to manage heat with two graphics cards. I’d like to order all the components in a single order, but I’m unsure about my choices. I’d appreciate a response from a company representative so I can confirm the order. Thank you!
 
Eddy

Eddy

Iceman
Staff member
Hi,

For this setup, at least 2x 360 mm radiators would be required. However, based on the pictures of the case, I can only see space for one radiator. A second one seems to be indicated, but there are no openings or options to route fittings or tubes past the first radiator. I do not see how such a setup could be built inside this case.

I also cannot see any space for a reservoir with a pump. Because of this, I would have to rule out a possible internal setup.

If it were only about cooling one graphics card, and noise was not a major concern, it could be done with one 360 mm radiator. However, with this hardware and setup, the fans would probably have to run at around 2000–3000 rpm.

For that reason, I will not prepare a parts list at this point. Either an external radiator would have to be used, or the case would need to be changed. Alternatively, you could use only one radiator, but then I would not know where to install a reservoir with pump. There are no mounting holes for this, at least none that I can see on the product pictures from SilverStone.
 
S

silentcloud

New member
Have you had any experience installing a system like this in enclosures that can be mounted in a 19" rack? If there is a specific model, we would be happy to purchase it.
The main objective is to assemble it into a water-cooled rack, regardless of the cost
 
Eddy

Eddy

Iceman
Staff member
You must log in or register to reply here.
Top