Yosaro
New member
Hello, I have just put my XFX 7900 XT under water.
Following the instructions to the letter, I fitted the graphics card and waterblock, put everything under water and carried out various tests.
I quickly realized that the hotspot temperature had risen to 110°.
So I disassembled the graphics card, checked that my thermal pads were in the right place as indicated in the manual and that the thermal paste had been properly applied.
I tried again, changing the thermal paste, but nothing worked. I've taken it apart 4 times now.
Before I put my graphics card under water, I didn't have any hotspots.
The only solution I have is that the waterblock is defective.
If anyone can help me
Following the instructions to the letter, I fitted the graphics card and waterblock, put everything under water and carried out various tests.
I quickly realized that the hotspot temperature had risen to 110°.
So I disassembled the graphics card, checked that my thermal pads were in the right place as indicated in the manual and that the thermal paste had been properly applied.
I tried again, changing the thermal paste, but nothing worked. I've taken it apart 4 times now.
Before I put my graphics card under water, I didn't have any hotspots.
The only solution I have is that the waterblock is defective.
If anyone can help me