How to connect Alphacool Eiswolf 240 GPX Pro Nvidia Geforce RTX 2080/2080Ti - Black M07 to GA-H110M-S2H MB

I

IvanS

New member
Hi,

I just received my Alphacool Eiswolf 240 GPX Pro Nvidia Geforce RTX 2080/2080Ti - Black M07 cooling.
As I read I need to connect the cooling to 3-pin slot on MB, bu my MB have only one 4-pin SYS_FAN slot.
Can I connect Alphacool Eiswolf 240 GPX Pro Nvidia Geforce RTX 2080/2080Ti to this slot?
And how can I check if the cooling pump is working correct before installing it on GPU?

Many thanks in advance.
 
Metropolis34

Metropolis34

Support
Staff member
Hi There,

Yes it sholud work with the 4-pin SYS FAN slot and you just need to connect the power cable of the Eiswolf and run your PC. You will see after if the unit works correctly or not.
 
I

IvanS

New member
Than you for the info.
I connected the cooling system to SYS_FAN slot and can blue inscription "xcoоl" to shines.
I also hear a very slight noise from pump, but the water is not flowing.
How can I resolve the problem?

Many thanks.
 
I

IvanS

New member
And just as additional info: it is brand new cooling system.
My invoice number is 10313863 and order number is 2714800 / 30.08.2019.
 
Vanzin

Vanzin

Support
Staff member
HI,

Could you send us a short video where we can hear the noise from the pump?
 
I

IvanS

New member
Hi,

thank you for the answer.


I think the pump is working, but I have another problem.

I have two GPU cards and the cards are listed in this list:

https://www.aquatuning.de/download/Kompatibilitätsliste2080TiM02.pdf .

But the cards are not compatible with Alphacool Eiswolf 240 GPX Pro Nvidia Geforce RTX 2080/2080Ti - Black M07 cooling and I can not use it.

I have this cards:

MSI GeForce RTX 2080 Ti Ventus 11G 11GB GDDR6

and the second is

Palit GeForce RTX 2080 Ti Dual 11GBGDDR6 (NE6208T020LC-150A)

No one from this cards can be used with the cooling and the cards are listed .

At the moment for me the cooling is useless.

Many thanks and best regards.
 
Metropolis34

Metropolis34

Support
Staff member
Hi, we have five different blocks for the Palit the graphics card is reference design so you need the M02 block not the M07. What is the PCB number of the MSI one?
 
You must log in or register to reply here.
Top