How to: Expand your Eisbaer AiO with a NexXxoS V.2 radiator

Eddy

Iceman
Staff member
Very similar. The differences are minimal to not measurable. It was more about a new look. In addition, the radiator for the new locking screws had to be changed.
 

Eddy

Iceman
Staff member
Lool... ok... what do you like to cool? We are using only 2x 360 ST30 radiators to cool server with up to 9 GPUs. Ha ha.....
 

CRYSIS1982

Member
Lool... ok... what do you like to cool? We are using only 2x 360 ST30 radiators to cool server with up to 9 GPUs. Ha ha.....
I'm cooling my 4790X @ 4.9ghz, two EVGA 1080tis @ 2.1ghz.
It gets over 40° here in Australia in the summer.
The main thing I wanted from upgrading form my two NexXxos 360s was to have the same amount of cooling headroom, but to run my fans at the lowest RPM so it is whisper quiet.
14
 

CRYSIS1982

Member
You have some space on the bottom for a further radiator. A 240/280 maybe?

The mount spacing is not correct for radiator support. ☹️. It's more for intake fans.

Plus I think having the equivalent of eighteen 120mm radiators is enough for now. ?

I'm lucky that I have a few gold Alphacool stickers left over to place on my case as well once I finish filling the loop this weekend.
 
Top