Hello.
I purchased and installed Alphacool Eiswolf 2 AIO - 360mm RTX 3090 Founders Edition with Backplate (14463).
It runs pretty good so far, but there are 2 things i'm needing help with
#1: I found memory /backside is still very hot, sometimes >100C. so i need to buy/install an active backplate
Qs.1. is 13039 the correct part to get (compatible with 14463)?
Qs2. besides MCX 2x distributor (13041), what other connector parts do I need to integrate my existing 14463 +13039 ?
#2: Also,, there's a slight problem; the original 3090FE is a 3-Slot card, after installing the AIO, i believe it will take up 2-slots.
But, the original 3-slot bracket isn't compatible with AIO and the AIO did not include the 2-slot hardware bracket.
please advise where i can purchase a bracket that's compatible with the AIO.
Thank you
I purchased and installed Alphacool Eiswolf 2 AIO - 360mm RTX 3090 Founders Edition with Backplate (14463).
It runs pretty good so far, but there are 2 things i'm needing help with
#1: I found memory /backside is still very hot, sometimes >100C. so i need to buy/install an active backplate
Qs.1. is 13039 the correct part to get (compatible with 14463)?
Qs2. besides MCX 2x distributor (13041), what other connector parts do I need to integrate my existing 14463 +13039 ?
#2: Also,, there's a slight problem; the original 3090FE is a 3-Slot card, after installing the AIO, i believe it will take up 2-slots.
But, the original 3-slot bracket isn't compatible with AIO and the AIO did not include the 2-slot hardware bracket.
please advise where i can purchase a bracket that's compatible with the AIO.
Thank you