New Apex thermal grease with 17 W/mk!

Thomas_S

... the nice marketing guy next door
Staff member
Alphacool introduces the new Apex thermal paste. With a thermal conductivity of 17 W/mk, it enters the circle of the most powerful thermal pastes on the market.

The main objective during development was, of course, to increase the thermal conductivity. However, points such as viscosity and durability should not be ignored. Alphacool was able to optimize the viscosity so that the Apex thermal paste is particularly suitable for high contact pressures and is still easy to process. The main ingredient of Apex Thermal Grease is a nano-powder with a very low thermal impedance. This makes it possible for electronic components to be cooled efficiently, thus extending their durability and improving their reliability.

The thermal paste is delivered in a 4g applicator with a screwable cap. The supplied amount is sufficient for several applications and can be stored in the applicator to protect it from drying out.​

Technical data
Thermal conductivity17 W/mk
Volatilization Rate (24H@200°C)%<0.5
Density (g/cc)3.5 (Test method ASTM D792)
Viscosity (mPa.s)35~220*103 (Test method ASTM D2196)
Continuous Using Temperature (°C)-40°C to 120°C
Thermal Impedance (°C in 2/W)0.10 +/- 0.1 (Test method ASTM D5470)
Max. working pressure (psi)40
Colorgray
Quantity4g

engforum.jpg
 
Top