New products: NexXxoS HPE-45 & HPE-60 X-Flow full copper radiators

Thomas_S

... the nice marketing guy next door
Staff member
Alphacool today presents the HPE-45 and HPE-60 X-Flow, the new generation of high-performance radiators from Alphacool's proven NexXxoS full copper radiator series.

What is new? With the HPE series, Alphacool increases the number of cooling channels within the radiator. This change gives a significant increase in cooling performance without increasing the restriction in the radiator. Another performance-enhancing feature of Alphacool's HPE series is the high fin density. With a fin spacing of 15 or 16 FPI, it enables an optimal flow of air. If the radiator is equipped with 80 mm fans on both sides in push/pull mode, a significant reduction in water temperature is demonstrably possible compared to standard radiators.

The NexXxoS HPE-60 all-copper radiators also feature Alphacool's proven X-Flow technology. This means that the Inlets and outlets are located on the opposite sides and thus enable an easy realisation of a water circuit within a server rack. The 60 mm thick radiators can be equipped with three or four 80 mm fans per radiator side.​

1. Alphacool NexXxoS HPE-45 Full Copper 80mm Triple Radiator

L x W x H286 x 80 x 42 mm
Material cooling fins, channels & prechambercopper
Material outer housingsteel
Fins per Inch16
Threads2x G1/4“
Fan size80 mm
Fan slots3 one-sided / 6 double-sided

(>>>Shop offer)

2. Alphacool NexXxoS HPE-60 Full Copper X-Flow 80mm Triple Radiator


L x W x H287 x 80 x 60 mm
Material cooling fins, channels & prechamberKupfer
Material outer housingStahl
Fins per Inch15
Threads6x G1/4“
Fan size80 mm
Fan slots3 one-sided / 6 double-sided

(>>>Shop offer)

3. Alphacool NexXxoS HPE-60 Full Copper X-Flow 80mm Quad Radiator

L x W x H367 x 80 x 60 mm
Material cooling fins, channels & prechamberKupfer
Material outer housingStahl
Fins per Inch15
Threads6x G1/4“
Fan size80 mm
Fan slots4 one-sided / 8 double-sided

(>>>Shop offer)

FB_NexXxos-HPE-60.jpg
 
Top