Replacing Thermal Pads and Another Question

[Dukman]

Recently purchased and installed an Eiswolf 240 on my Gigabyte 2080Ti Extreme Waterforce. Unfortunately, Im not happy with my install job of the thermal pads and would like to re-do that.

What thickness do I need for front and back? I am guessing at 1mm for GPU side and 5mm for the back?

Also, if I wanted to swap out the existing Eiswolf QDC's with the Eisxaphen QDC's that should be possible, correct?

 

[Metropolis34]

Hi, you need 1 and 2 mm pads for the block. Please check the link below:

https://www.alphacool.com/download/GPX-N-PRO-2080ti-2080-M11.pdf

Also, if I wanted to swap out the existing Eiswolf QDC's with the Eisxaphen QDC's that should be possible, correct?

Yes you can do that but this is at your own risk.

 

[Dukman]

Duh. The info was on my instructions and I totally missed that.

Thank you.

 

[Metropolis34]

You are very welcome.