I purch.ased a 420 a while ago. Not knowing much I installed it properly but have not been able to get the pump working. On a Aorus Pro Wifi MB. I recently upgraded my GPU and heat is now becoming an issue.
I have the pump power on the CPU_OPT header, I have the bios set to full speed. BiOs are up to date. I've changed the header location to Sys _5_pump. As well with the same result. The MB bios reads 0 fan speed and the pump is not spinning. Not being very good at all this if there is a step I'm skipping or don't know about any help would be awesome.
I have the pump power on the CPU_OPT header, I have the bios set to full speed. BiOs are up to date. I've changed the header location to Sys _5_pump. As well with the same result. The MB bios reads 0 fan speed and the pump is not spinning. Not being very good at all this if there is a step I'm skipping or don't know about any help would be awesome.