I have placed an order for some Ut60 360 and UT60 480 radiators. I would like to know the coolant capacity of each of those radiators. Would you recommend to use a diluted white vinegar solution to flush the radiator to get rid of solder flux and followed by a couple of distilled water flush? Your help will be very much appreciated. Cheers
UT60 radiators
- Thread starter Superlp12
- Start date
Hi,
The 360 mm UT60 radiator holds approximately 600 ml of coolant, while the 480 mm UT60 holds around 700 ml.
Vinegar should never be used to clean a water-cooling system, as it attacks the copper and solder joints. It will certainly remove a great deal of residue from a radiator, but people often overlook the fact that it also damages the radiator by removing material that should remain intact.
Anyone recommending vinegar for this purpose simply does not know what they are talking about.
The 360 mm UT60 radiator holds approximately 600 ml of coolant, while the 480 mm UT60 holds around 700 ml.
Vinegar should never be used to clean a water-cooling system, as it attacks the copper and solder joints. It will certainly remove a great deal of residue from a radiator, but people often overlook the fact that it also damages the radiator by removing material that should remain intact.
Anyone recommending vinegar for this purpose simply does not know what they are talking about.
Thanks for the information and advice. This certainly helps alot. Cheers