Search results

If a graphics card is not listed in the compatibility list, it is considered not compatible. Either because it is not compatible, or because we were not able to verify it. Therefore, the official statement is that the cooler does not fit. However, there is a chance that it might fit. EVGA...

@Siker Orders always remain “in process” until someone packs them. And both in the office and in the warehouse, we only work between 7:00 and 17:00. At 23:11, there is nobody there to take care of anything, except for the night watch of course. But they do not handle orders. :LOL:

Ahoj, nie som si istý, či je problém v preklade, ale nerozumiem presne, v čom je problém. Pokiaľ to chápem správne: Chladič je namontovaný. Na skrutkách však máš ešte približne 1–2 mm vôľu. V takom prípade je všetko v poriadku. Nikto nehovorí, že matice sa majú dotiahnuť až na doraz. Majú sa...

If you have pictures, please send them to info@alphacool.com with a brief explanation of the context, and we will be happy to take a look at them.

The core performance only means the same clock speeds. It does not mean that it has the same PCB layout. We do not know this PCB number and we also do not know what the PCB looks like. Therefore, there is no guarantee that the cooler will fit.

To have a bit of headroom, I would say keep the water temperature below 50°C If it goes slightly above that on extremely hot days, that is still okay. However, from 55°C onward, I would really start to worry and look into making changes.

Article 15357 is the same LED strip as the one used in the cooler. You only need to cut it to size at the end. Between each LED, there is a copper-colored area with a thin white line in the middle. You can simply cut the LED strip there with scissors. These LED strips are used in all of our...

@Indyman The PWM connector does not draw any power for operating the pump. The PWM connector is only used to read out the RPM and, of course, for the PWM signal itself. The pump is powered exclusively via the SATA power connector. :)

What a small world sometimes. Orders are only shipped once all parts are in stock. We currently have such high demand for EPDM tubing that we are having quite a bit of trouble increasing the quantity of incoming stock and getting it into the main warehouse quickly enough. However, 1 m of...

@OB-HORN The cooler will be a standard ES 1-slot cooler, similar to the one I linked below. What exactly do you mean by “easy to connect”? There are several different ways to connect something like this. In the enterprise sector, this is usually done via a distro plate such as the C3, C5, or...

The angled fittings do not include a tube fitting, so you still need to screw in a suitable tube fitting separately. Based on your pictures, you need a total of 10 tube fittings. You currently have 12, so that is more than enough. Overall, everything actually looks good. The only question is...

No, we do not offer pre-cut pads separately for specific coolers. Unfortunately, there is no way around cutting the pads to size yourself. The only alternative that makes everything much easier is a thermal putty such as the X1...

The maximum water temperature you should allow is 60°C. Many water-cooling components are not designed for higher temperatures. However, that is already an extremely high temperature. Normally, water temperature is calculated using a delta value, meaning the difference between the water...

If you run the Apex pump at full power, it is a little louder. However, with your loop, you will only need to run it at around 30% PWM. At that speed, it will not be audible.

@DawnOfNemesis Nein, das Layout beim 870E ist völlig anders, auch wenn es auf den Bildern nahezu identisch aussieht. Ein entsprechender Monoblock wird noch kommen. Ich kann dir aber im Moment nicht sagen, wann genau. Mit einem Monat würde ich aber noch rechnen.

Hi, Regarding the first question: It should just about still work. However, I would strongly recommend getting a proper reservoir with a powerful pump. Then you won’t have to worry about this kind of thing anymore when making further upgrades over the next few years. In addition, the flow rate...

Das Problem wird eher daran liegen, dass nach deinem Befüllen einfach noch Luft im Radiator war und diese jetzt im AGB gelandet ist. So viel Flüssigkeit verschwindet nicht nach zwei Monaten einfach so. Ausbauen und dann nochmal befüllen. Man kann auch die Bodenplatte abschrauben und darüber...

I’m not going to give you exact numbers. Airflow, the type of fans, the exact flow rate, and a few other factors all affect the overall cooling performance. But going from 3x 360 mm radiators to 3x 420 mm radiators will not make a huge difference at 600–700 W. Maybe around 2–3°C difference in...

I don’t see any damage yet. Flushing should be enough. If the residue inside does not come loose, use a cleaning kit, such as item 13016. Alternatively, you can use a coffee machine cleaner based purely on citric acid. Let the cooler “soak” with it for a while and then rinse it thoroughly again...

Have a great weekend and have fun.