Search results

You could send us pictures of your PCB (front & back) - so we could check your card for possible compatibility with our cooler.

Hallo Sebastian, zwecks des Tropfens: Hattest du den Fillport geöffnet? Die Verschlußstopfen verfügen über einen O-Ring - ggfs sitzt der nicht richtig. Thema Temperatur: Auf wieviel RPM laufen deine Lüfter? Eventuell passt auch der Anpressdruck des Kühlers nicht. Ein Bild des Abdruckes auf der...

The active backplate is only available separately. An AIO version including an active backplate is not planned for now. The tubes of the AIO should be sufficient for installation in your case.

It is very rare that the holes do not match. Do the fans still come on from the side?

Hi, please contact our support team by email (info@alphacool.com). Link to this thread so that our support team can also access the video. But please note, due to illness of some of our support staff, we are currently only able to respond to support requests to a very limited extent. Thank you...

Mit den Daten, die uns vorliegen muss ich das vorerst verneinen. Du kannst uns aber Bilder deiner PCB (vorn+hinten) zukommen lassen. Damit können wir prüfen, ob der vorhandene Kühler ggfs. kompatibel mit deiner Karte sein könnte.

@Eddy, could you help with that? Or @Luckystricker knows advice!? ;-)

... they are not. The flow rate of the DC-LT2 is 75 litres per hour. Of course, this is still reduced due to the coolers, quick-release couplings, etc. But it is still quite sufficient for the AIO. With a DDC or D5 pump, you could definitely increase the flow rate and thus also improve the...

For suggestions, only pictures of your setup will help here ;-)

Have you checked that the thermal pads have sufficient contact with the components? A picture of your PCB with the marks on the pads would help solve your problem.

I can't answer that question here in the forum. Please contact our support team by email (info@alphacool.com). However, due to the illness of some of our support staff, we are unfortunately only able to respond to support requests to a very limited extent at the moment. Thank you for your...

Moin, den Anschluß kannst du für den Temp. Sensor verwenden.

Of course, you could still play with the RPM of the fans. I think that if you let them rotate a little faster, the temperatures will also go down a little! Nice to hear that you are satisfied!

Both ways are possible! But my advice would rather go in the direction of the video! GPU->Radiator->CPU->Radiator How did you make it work?

You're right, it's all down to the organisation! Quarter 1 2022 will definitely work!

We advise against using UV-reactive liquids. The reason for this is that the substances and particles contained can quickly contaminate, clog or even damage components of your water cooling system. In my opinion, the high maintenance effort and the expected loss of cooling capacity do not...

@Grey_4_Lance & @church Keep going, your theories are really interesting ;-)

Have you checked the contact pressure of the cooler? Pictures of the imprint on the thermal paste would help here.

Ich muss kurze noch einen Hinweis los werden, bitte hab etwas Geduld bei der Antwort - unser Support Team ist aufgrund von Krankheit derzeit stark dezimiert, es kann also etwas dauern!

-> das ist kein Problem -> ich sehe da auch kein Problem bzw. lässt sich da vorab erstmal kein Problem prognostizieren! ;-) Vielleicht hast du ja noch die Möglichkeit mittels zusätzlicher Gehäuselüfter ein "mögliches Ungleichgewicht" zu vermeiden?