Search results

Hi, please contact our support team (info@alphacool.com) to get the correct bracket.

HI, the MCD Sensor is sitting at the memories. Where exactly I can´t say. But it would indicate that also one of the memories doesn´t have good contact.

Hi, every GPU has a Hotspot temperature sensor, even when they are air cooled. When mounting the water block, did you check if the PCB is straight? Unfortunately AMD has a big Problem that their PCB´s are bend. When mounting a water block, you have to make sure, that the PCB is straight and...

Hi, you can directly connect 3 components to the universal Distro plates. Since you have 4 components ibn your system ( you are replacing the Reservoir with the Distro plate), you have to connect at least to components serial. This can look like this. Please note that the photo is a example for...

The pump height is indicating how high a pump can pump the water.

Hi, the dimension of a O-RIng are always the inner diameter and wall thickness.

Hi, the imprint of the GPU Core doesn´t look very good. Did you mount the water block as shown in the manual and did you tighten the four screws around the GPU DIE clockwise and not over cross, as often done? If you have done it, can you please send a photo of your GPU, where we can check the...

Moinsen, das sieht garnicht gut aus und eine Weißfärbung des AGB habe ich so auch noch nicht gesehen. Da sich der obere Teil auch etwas gewölbt hat und sich Risse gebildet haben, würde ich auf eine Überhitzung der Kühlflüssigkeit tippen und damit einhergehenden Überdruck im System. Wenn du dich...

HI, if the O-RIng is to thick it won´t fit.

HI, a Delta of around 12°C is very good.

HI, I am sorry but we don´t sell the O-Rings as spare parts. The O-Rings in the water block have following dimensions. Maybe you can purchase them from a external retailer for O-Rings. 1x 156,5x2mm NBR70 1x 46,5x1mm NBR70 2x 14x1,5mm NBR70

Hi, as I have told in my previously post, we don´t have a compatible water block for this GPU in our assortment. Please get in contact with your reseller regarding a withdrawal from your order. Please note that their conditions and requirements are crucial.

https://forum.alphacool.com/threads/alphacool-eisblock-aurora-geforce-rtx-4090-amp-with-backplate-thermal-issues.4125/post-25228 You can find in the Link a official statement from us regarding the Problem with the Package Problem of the GPU DIE. If your GPU is affected with the problem you can...

Gu @germs as you can good see in your photo are the pink squares placeholder on the 4080 Super. In other versions, there can be components.

HI, sry for the late answer. I have checked it. First the water block was never listed as compatible with the PNY 4080 Super Verto. The marked component on your PCB wasn´t existing on the PCB we had and is causing that the water block don´t have enough contact. Therefore we don´t have an...

I have already answered in your German post. Please don´t double post.

Moinsen, der von dir genannte Kühler ist mit deiner Grafikkarte kompatibel. Um diesen Verwenden zu können, wirst du jedoch einen kleinen Custom Loop benötigten. Der Umbau der AIO ist sehr kompliziert und wird auch zum Verlust der gewährten Garantie führen.

HI Unfortunately XFX have used two different PCB Layouts for this series. If you send us a photo of your GPU wothout the original cooler we can check if our water block will fit your GPU.

HI, this doesn´t lock good. You have wether enough imprint on the thermal pads nor on the GPU DIE. Normally you should have at least on the thermal pads good contact, if you don´t have contact with the GPU DIE. Did you remove the plastic protection Standoffs, before mounting the water block...

HI, did you maintenance your system in the 3 years? When a water cooling system is overheating but the pump is working, it is simply clogged and you have to clean it.