Search results

HI, I am sorry but we won´t produce any new water blocks for the last generation anymore.

HI, as you can see is the water block available again and the problem has been fixed. Regarding your GPU I am sorry but we don´t have any information about the PCB. If you send us a photo of your GPU without the original cooler we can check if we have a compatible water block in our assortment.

Hi, the difference between a ST25 and a ST30 is in this heat range not really measurable. We are speaking here about 1- max 2°C water temperature. different

hi, all listed products are compatible with each other

HI, I am sorry but we don´t have a compatible water block for this GPU in our assortment.

Hi, Could you please send us a photo, where we can check that the water block is bend?

HI, which tube are you exactly using? We are offering a few 16/10mm tubes.

Hi, I know that not everyone is amused about the fact, that we couldn´t find a problem. Fact is that the same GPU, which had a problem has been working here after checling imprints and remounting.Even with not replacing any thermal pads and paste at this moment. The only thing we did, after...

As you have marked it in our photo it is correct.

MOinsen, den Impeller siehste im Fenster nicht wirklich der ist sehr im Hintergrund und Schwarz. Das weiße/Durchsichtige was du in der Regel siehst ist ein Bubble Down und sitzt vor der Pumpe. Sollte sich das drehen, ist die Eisbaer mehr als Defekt ^^. Aber wenn die Pumpe ein Tachosignal...

Hi, which support team did you contact? The RGB Strip you have received is wrong and can´t be mounted. You will need the one I have linked.

Moinsen, das du die Pumpe drehen siehst ist sehr schwer zu erkennen, besonders im verbauten Zustand. Bitte prüfe einmal im BIOS, ob die Pumpe ein Tachosignal ausgibt, wenn ja, funktioniert die Pumpe.

I have already answered your question in another thread. Therefore I will close this one

HI, the easiest and cheapest option would be a AIO from our Eisbaer Series. https://shop.alphacool.com/shop/cpu-gpu-aios/cpu-aio/11286-alphacool-eisbaer-360-cpu-black Otherwise you have to purchase a radiator, CPU cooler, stronger pump and a reservoir.

https://forum.alphacool.com/threads/how-to-top-up-or-refill-the-alphacool-eiswolf-pro.562/

Hi, this looks like a normal broken cable and the LED Strip has to be replaced. If you are still in our offered warranty of 2 years, you can contact our support team ( info@alphacool.com) to get a replacement stripe. If not, you can directly purchase a replacement from our Website...

HI, sure you can mount the DC-LT3600 in every component, which is also using the DC-LT pump. But you won´t get any better flow or temperarures, just a louder pump, since the DC-LT 3600 is for industrial use.

Moinsen @Mikey74 , wenn du die Aktive Backplate mit einer Eiswolf verwendest, kannst du die aktive Backplate nur über die G1/4" Anschlüsse anschließen. Die verbaute Pumpe ist für die MCX Variante zu schwach ( steht auch in der Artikelbeschreibung der Backplate).

Hi, @DirtyAlpaca Thanks for your post, that I am on vacation. The GPU has been send back to you and you should already receive it back. Unfortunately we couldn´t recreate the problem from @DirtyAlpaca with his own GPU, which he had send us. The only problem we could find out, was that the...

Hi Thanks for the photos. As I can see you have a uneven imprint like other customers. This can simply be fixed when you are mounting the water block again and tighten the screws correctly. First the Screws around the GPU DIE clockwise handtight ( 1-1,5nm). then start with the other screws with...