Search results

What about ASIN B07P5S1ZBQ? Is this a counterfeit or branded as well (ordered from the same factory)?

Yes, these and another 1300 rpm one and different sizes (95mm with regular plugs) and the older ones have a blue αc logo.

Some of those with grey rubber pads and double shroud rgb rings have 6 pin.

Is the remaining wire for reading out the rpm?

Es ist nicht beeinflussend. Die Finnen sollen nur Wärme aufnehmen, nicht Wasser.

Die Entlüftungsöffnung darf nicht offen sein beim Pumpen. Eine Befüllflasche nimmt leicht den Dichtungsring mit. Nicht verlieren.

I never used plastic hoses and it turned like this immediately when I filled a biocide mix.

Ein runder Flansch aus einem transparentem Material für unter die Abdeckung am Ausgleichsbehälter. mit Einkerbung für die LED. Dann leuchtet der Zwischenraum unten am Ausgleichsbehälter. Aber unklar ist, ob es weit nach oben scheint. Da die Abdeckung schwarz ist, eher nicht. Vielleicht doch...

Deutsche Post GmbH made the price chart worse. BÜWA and letter all +0,05€, some international product was scrapped or changed to force expensiver one and they tell you not to send anything else than paper documents on a certain product.

There are (Alphacool) LED strips like Aurora Flex Lights Magnetic and thinner ips65 norm waterproof silicone casted strips. I never saw them wrapped around a resorvoir, maybe it is ok. But the rounded LED side should face the inside, it may not stick well.

I mean the rubber washer. It is placed inside the water inlet/outlet/filling port. It is not a o-ring shaped like a donut, it is flat.

You can place single LED with molex plug anywhere.

If you can fit two radiators in, go for that. One single Radiator is not enough per rule of thumb for surface per watts. If one of the radiators is not pre-filled you need to add coolant (the same).

Yes, this is the easy solution with two quick connectors. One of them is bundled with the Radiator and Eisbär. You can choose to connect them to a combined loop or add another pump for two loops, but one Eisbär should be enough to power the combined loop.

Just add fans, tubes or soft tubing and fittings or two sets of fast couplers.

Sieht aus, wie ein Idealbeispiel.

I am going to stick tape over the motherboard's red overclock knob mode indicator. It distracts my desired lightning in aqua blue and lime green. It enlights the whole resorvior area and the water in red. You could try just that. Aquatuning has single LEDs as reward for purchase value. There are...

I lost one of the rubber washers from the G1/4" threads, it must have fallen out when using the water bottle's nozzle. Are these norm parts?

Ein Temperatursensor passt auch in den Eisbär.

Es gibt keine ordentliche farbige Flüssigkeit. Alle sind Plörre. Destilliertes Wasser ist gut, manche farblosen Mischungen besser, manche schlechter.