Search results

PLEASE the often asked for 140 version of the Alphacool Susurro 120mm 17€ fan.

I got a 240 and 280 radiator. The top fan is an Alphacool Susurro 120 and a filed PureWings2 both with Susurro rubber condom. The BeQuiet fan supports one of two pairs of dualchannel ram. Its static pressure is too weak. I don't want to cut into another 18€ fan whose rotor may be bigger. A...

§ 439 Abs. 2 BGB.

Bios, kann man nicht verändern, ohne das Bios zu modifizieren.

Das Kabel ist nicht verdreht. Oben 5V.

Aquacomputer GTX1080, cpu cooler 3800X; Alphacool 280, 240; expensive fans, 200ml resorvoir, flow meter, DDC, but with downclock+PBO tuning (not curve). Still 65°C NFSU2, 83°C Cinebench R23 multicore, after long desktop waiting 41°C, UEFI 41°C, everytime worse benchmark results. Stock+XMP up to...

Rohre kaufen: Fittinge 13/10 von Alphacool, es gibt nur wenig markenlose 13/10-Auswahl. Für die meisten ausgefallenen Fittinge 14/10.

Geringe Radiatorlänge durch seitliche Anschlüsse.

Zylindrisches Gewinde G1/4" mit O-Ring. Jeder einzeln erhältlicher Radiator hat so ein Gewinde (selten G1/8" oder Schlauchtülle). Die mit Fittingen bereits versehenen Schläuche von BarrowCH und Alphacool (mit Schnellkupplung in der Mitte) haben auch G1/4"-Gewinde. Die Pumpe einfach unten...

Bending back copper works cold, but this breaks the sealing surface. There will be a gap between the radiator and the o-ring. You can't replace honing with filing. I never tried milling. Don't mess with silicone sealant, it does nothing.

Beim Eisbär passen bereits Endkappentemperatursensoren aus China in die Befüllöffnung. Ein voltage to pwm converter passt nicht in einen CPU-Kühler zudem mit Pumpe und Ausgleichsbehälter.

I had to replace some o-rings, because the pipes cutting them when not pushed in straight. I mounted the hard tube fittings outside the computer and used turnable thread pieces to mount inside the computer. But you can see different brands' hard tube fittings be mounted inside computers on Youtube.

If your hand doesn't get a red ring, you didn't press hard enough.

The 13/10 HT are hard to install. When the pipe is straight, I need to attach a fitting on the other side to enlarge the surface to press on by hand, the side to be fitted is pushed on the floor. For bent pipes I may use Molykote EM-*0L, but not much. Some random airtight Chinese fitting is a...

There definately is UV blue 13/10 Alphacool tube available at some internet vendors. Bykski has 14/16/20 hard tube fittings with lights (expensive >14€).

Die Alphacool resorvoir holder clear oder schwarz mit knapp über 180° aus ABS haben entspannt einen Radius von nur 23mm. Dazu muss die Schraube etwas lose sein, damit sich die Grundplatte deutlich biegen kann beim Spannen. Ist das Maß Ausschuss oder maßhaltig für 50mm Durchmesser? Die...

How to make a simple cooler block with usual China parts and a lathe?

The flow rate with only a ddc installed is next to the sweet spot of the flow meter. It is abot 3l/min @ 10.2V. Eisbär alone won't trigger it or up to 0.6l/m, both installed and running less than 2l/m, the Eisbär then 0.3l/m. or worse. And the flow really decrease loudly and to stop. Everything...

The picture shows a Aquacomputer Kryos non-rgb with telemetry display.

Right now it has only a ddc in it (Under the 200ml resorvoir), the flow starts higher than with Eisbär installed and does not drop. But the cpu temperatures takes long to cool back down when putting a game in background or idling. 3800X NFSU2 game about 65°C. I experimented with putting ddc and...