Search results

I won't worry much about this, I have a 3900X and whatever cooling there is (I've upgraded thrice, now I have an Eisbaer280+Eiswolf2 360 loop), it jumps straight to 50ish when a couple cores are under load, then only up to 65C in CPU benchmarks with all cores used What's your temps in...

Ok, looks like I got everything, or at least hope so :) Here's my order list, ist alles gut ? :) Happy New Year to all of you also ! Alphacool Shopping Cart Item ID Product Name 1013350 Alphacool Eisbecher D5 250mm Acetal reservoir incl. 1x Alphacool Eispumpe VPP755 V.3 1016781...

Great! But now I see there's several tube and fittings sizes, what should I use ? 13/10 11/8 whatever ???? And there's a ton of fittings choice, which ones should I get ? I do need a simple guide "build custom loop 101 for dummies" lol

According to the config page the 2080 blocks do work with your model https://www.hwconfig.com/waterblock-finder (enter the specs)

Ok, was thinking of getting this "set", what's the difference , as it's cheaper (150mm version isn't available anymore) ? https://www.alphacool.com/shop/pumps/pumpreservortop-sets/d5-vpp-sets/21542/alphacool-eisbecher-d5-250mm-acetal-reservoir-incl.-1x-alphacool-eispumpe-vpp755-v.3 And pls...

That's an idea, I didn't spot there were some holes there over the PSU for a rad, my initial idea was to attach the pump+res to the front rad indeed Both will work then thx! A last question : I was thinking about using an Eisbecher 150mm with D5 pump, will this be good or should I go for the...

Ok here it is My tube management is faulty sorry :) I think I can put a pump+res behind the front rad and then just add tubes+QR couplings to connect the res with the existing tubes ?

Same here, I'm not sure how and where I can install res and pump in my P600S with rads front and top (360 & 280 no other possibility) Some clues ?

With my 3080 Eagle/Eisbaer2 I have max memory temp at 90c mining, much less gaming, all that with fans mostly silent at around 50% (that don't change much the mem temp anyway), so can't see any issue With stock "cooling", they had no pads and went up to 108c, adding pads made them down to 96c...

I've kinda same question, now I have my Eisbaer+Eiswolf2 loop, how can I upgrade it ? I've read for example that the pumps are only 3W and a bit weak for a loop, can I add another (the one above or another ?) easily using the fasteners ? Or do I need do to all the unmount/unfill/refill/remount...

Kinda necro, but I have a solution : I use FanControl freeware, it allows you to set any kind of curve or even temp functions (min/max, combo...) on ANY temp sensors for ANY fan (you can set your mobo fan to a NVMe temp for example, or your GPU fan to the mobo VRM temp but that 's stupid!!)...

Hi again I've just made my Eisbaer280+Eiswolf2 360 loop, works like a charm, but tubes are pretty long and it doesn't look very good inside the case... I'm not yet ready to do hard tubing, so I suppose I could rather buy replacement soft tubes and cut them at the correct length, but then I...

Thanks, think I'm getting it better now, it wasn't written anywhere that they were daisy chainable so I didn't know... Now I still have the waterblock RGB and the fans RGB to connect, but have only one cable and one RGB header, is some other cable in the package that I've missed or do I need to...

Thanks for the quick answer I've got the cable you mentioned but had to use it for the waterblock RGB cable that I've plugged to the RGB header on my board (Shouldn't I ?) Then I've nothing left for the RGB cables of the fans, I've used the 3-way splitter cable for the fans themselves (needed...

Just received today my Eiswolf2 for 3080 Eagle... and installed it this afternoon ! Super happy with it, my GPU never reached more than 1800Mhz and went up to 75C with super loud fans, it's now easy peasy at 1930MHz and don't reach 60c with fans set low enough to be silent (like max 60%)...

Ok, seems they'll fit any way I install it If ever I want later to change the non-fancy tubes of the Eisbaer and Eiswolf for shiney transparent tubes or whatever, is that possible as well ?

That's a beast of the mobo worth as much alone as many full PCs, but I don't see any pump or watercooing on it ?? https://rog.asus.com/motherboards/rog-maximus/rog-maximus-z690-formula-model/ And what do you want to watercool ? Watercooling the absurdly strong VRMs of this board is useless...

Ok thanks, seems I missed the language choice, will look at it again !

Hello Just ordered an Eiswolf2, and received all confirmation and shipping emails in German (I'm French, and had to translate them to know if it was shipped, delayed or whatever lol..), is there a way to get them at least in English ? Danke schön :)

Ok got it Maybe my question wasn't clear, it was about tube length, I wonder if the tube connecting the 2 rads is long enough to get from the bottom of the front rad to to the top rad on my P600S But I'll be able to see this for myself soon, I've ordered my Eiswolf2 ! :)