Search results

I think we can wait with new screws. However, if i see temps are rising and the screws got loose again, is it possible for me to purchase them from the store? I actually tried looking for them in the weekend without luck. :-)

it seems that you are right. I choose to flip my top radiator backwards, removed the bottom intake fan and mounted it on the radiator. Test 1) now I get max 63-68c on 55% fan speed. So two fans aren’t enough for the radiator when talking 2080 ti. test 2) i took the card out of the pc, and...

The radiator iitself is 42.7c. :)

Here is the new radiator and the new water used bought from your website. The radiator was empty, and the bottle was full. I've connected the tubes to the rad, so the system was connected. I'll then opened the fillport shown in the video, and filled the radiator. I've shaked it after filling, to...

I have just received the water from you guys as we talked about it. Just so i'm 100% sure not to do anything wrong in the progress. The shipment was very quick. I have to admit, you guys have the best service i have experienced. I made sure to also write a good review on trustpilot. Also, i...

Indeed he has. Thanks! :-) Yeah mee too. Else i guess last case scenario is just to purchase a whole new set for my 2080 ti. As always i will update you when the new radiator arrives and installed. Have a great day!

Fantastic! Thank you very much for being so understanding. Yes, it's a 240mm. :-)

Hmm. It depends. Is it the whole unit? I mean pump, + backplate + radiator, or only the radiator? Replacing the raditor would be the most easy thing to do without uninstall everything and then install the old FE cooler on again, to uninstall the FE cooler to mount the alphacool on again...

Well, then i can't use my system unless i re-use the FE cooler again. I've already bought extra paste to get this working so far. I've also ordered some water from you guys now. I can send it back if you think the reservoir would not solve the matter. How should i then install the reservoir in...

Update 3. I've filled as much distilled water as possible to close the loop and the radiator. Then shaked it. After that,i ran heavy Unigine heaven benchmark on extreme, and get max 68-70c now in 30 mins. BUT, only by putting the radiator fan speed to 100% now. Is this as it should be, or...

So here is an update. ive opened the connectors between the gpu block and the radiator. I holded the switch down in the RED connector from the radiator and turned on the machine to see if any water actually pushed out. And only a little bit came out, and then nothing. So.. something is not...

I also tried changeing the tubing rotation. Now i can feel water going through the pipes. BUT, only the one to the far right. That means the OUT is vibrating the water out, and the IN for the water does not. Shouldn't i also feel something on the IN tubing? Because if the OUT re-uses the same...

It doesn't have any hole. Only the openings in the middle of the tubes. Well.. Everyone delivers first next week. I want to use my system as quick as possible, so whoever can deliver fastes is the winner here. Which one of those is the fastes delivery? It says 1-3 days on the shop.

So, how am i re-filling the 240mm radiator? Through the tubing? If i order this from your site: https://www.alphacool.com/7437/alphacool-ckc-cape-kelvin-catcher-clear-1000ml Can i choose some fastes delivery to get it quick? Is there also other things i should buy to make sure everything works...

But how? The 240mm version i have doesn't have that hole for refill or am i blind? I consider buying this: https://www.alternate.dk/AlphaCool/CKC-Cape-Kelvin-Catcher-Klar-til-brug-1-L-K%C3%B8lerv%C3%A6ske/html/product/1071437?

What should i buy? this? Water And how should i apply it?

I'm still having issues. The gpu goes still to 84-90c. The pump is working alright. But, the pump also makes strange noises depending on the tube direction. Normal setup: https://drive.google.com/open?id=1BdmL1SoGWNdTVNcRDDpKOKLtdfpA9p62 If i reverse the case...

Hi Again Thank you very much for the new pump. I'm looking forward to test it! On the other hand, i’m unsure how to dismount the tubes from the existing pump. I don’t know if I searched wrong, but I don’t find a manual. They are quite tight. Do you have any suggestions? :)

Thank you very much! If anything more is needed for documentation, please feel free to reach out.