Lowrater
New member
Hi everyone
So, i've got myself a 2080 ti FE edition, and bought a used alphacool eiswolf 240 gpx pro (8 month old) for my 2080 ti of my friend. The temperatures at idle is fine at 28, but when i start a benchmark, the card frys it self to 75-84 quickly in a 7-10 secs, which i don't find ideal.
1. The card has been re-mounted and checked with the guidelines
2. The pump is in my pump header on motherboard, without any profile (Disabled for constant 12V).
3. The fans for the radiotor is connected to chasis fans on the motherboard, with an active pwm profile.
4. Setting the fans to 100% doesn't change anything with active temps on benchmark.
The temps (idle):
The PC build:
Specs:
asus z370-i gaming motherboard
i9-9900k with nzxt kraken
2080 ti FE with alphacool eiswolf 240 gpx pro
32gb RAM 2333mhz
2 x 250gb SSD
1 x nvme ssd 1TB
850W PSU
Fractal design nano S case
The block:
White pads = 2mm
Purple & green = 1mm
Paste use: Thermal grizzly paste
For the pump sound: Pump sound video
For benchmark test: Benchmark
I assume i don't need to refill the thing, since it cools it down shortly to 30c when quitting the benchmark?
Kind regards
Lowrater
So, i've got myself a 2080 ti FE edition, and bought a used alphacool eiswolf 240 gpx pro (8 month old) for my 2080 ti of my friend. The temperatures at idle is fine at 28, but when i start a benchmark, the card frys it self to 75-84 quickly in a 7-10 secs, which i don't find ideal.
1. The card has been re-mounted and checked with the guidelines
2. The pump is in my pump header on motherboard, without any profile (Disabled for constant 12V).
3. The fans for the radiotor is connected to chasis fans on the motherboard, with an active pwm profile.
4. Setting the fans to 100% doesn't change anything with active temps on benchmark.
The temps (idle):
The PC build:
Specs:
asus z370-i gaming motherboard
i9-9900k with nzxt kraken
2080 ti FE with alphacool eiswolf 240 gpx pro
32gb RAM 2333mhz
2 x 250gb SSD
1 x nvme ssd 1TB
850W PSU
Fractal design nano S case
The block:
White pads = 2mm
Purple & green = 1mm
Paste use: Thermal grizzly paste
For the pump sound: Pump sound video
For benchmark test: Benchmark
I assume i don't need to refill the thing, since it cools it down shortly to 30c when quitting the benchmark?
Kind regards
Lowrater
Last edited: