Search results

Well.. I thought as much, googled long and far, the problem is the cpu, I7 9700k is known for less than perfect production and heat dissipation... but its working well. I decided to just add a bottom radiator too, 2x120 is incoming... back to nodding sooner than expected... and this time I'm...

OK, I can't recreate the temps running only cine bench at full load.. I know, that order shouldn't be important, but could it be a tad better if I put a rad between cpu and gpu?

again after gaming, water is cooler than the other temps, I might have misread them. water temp. is rising steadily, gpu is stable, but cpu is at 67 at the time of this post, after gaming about half an hour... its the cpu adding lots of heat to the system all the time

https://aquasuite.aquacomputer.de/48057ecf-32cb-4a97-86b1-8b98140dc463 now, here have some live data... at least when booting the system new, water temp is lower than cpu but higher than gpu in idle :)

Well, as far as I was able to Google my things... water temperatures above 60 should be avoided at all costs for the pump and soft tubing ? so I will check and double check everything twice before calling it a day (and an alarmind beep is always nice to argue why I need more stuff to my gf ??)

Well... quite possibly I misremembered the max temps... Will have too look ath this or find log files. Next step will be aquasuite Web so that I get a data stream to my phone while playing... then I'll post here again ? the sensor is new and usually, well, all that I found, aquacomputer is a...

OK, well, this sounds logical, I will repeat the gamin experience (after finishing my essays) and try to log all the temps... need to find out where aquasuite saves logs...

ohhh... thx, yes, 22 to 24c atm, but it will be warmer in summer ? right after the radiators and reservoir. Agb/Pump - > Sensor (aquacomputer high flow NEXT) - > gpu - > cpu - > 360 Rad - > 240 Rad - > agb/pump

Well, the 3 120s are running at max, 1100 RPM, the 2 140 are running at 1300, pump at full-speed (eisball d5), room temperature is about 24c, I don't have an ambient sensor in the case :( CPU was 60max, about 50 when quitting after getting the water tempt alert, gpu was max 50, and about 40...

Now, I have an i7 9700k and an rtx 3080fe that are being water-cooled by 1x 360 Rad and 1x 280 rad... and still, after gaming about 2 hours of cyberpunk water temp reaches above 50c. everything is tight and fine, temps on cpu and gpu are fine, the fans are all in the right order (pull intake on...

Hey guys! ordered my first DIY watercooling setup, alphacool all the way and now I'm getting 3x 120rgb fans, the cpu rgb cooler and the gpu rgb cooler... and of course an eismatrix II controller to adjust my fans. additional cables I thought would come in handy: Alphacool Digital RGB LED...

Thank you for your answer! it's a rare occurrence online, that one gets the answers one needs 2ithout being insulted ? and well... that those to are staying red is clear, is just wanted to ask if it's possible to route them to the connector. to be more precise all fans are going to be red, but...

Hey guys! I'm planning my first DIY loop and I'm a bit stunted by what can control what. I do have a msi z390 gaming pro board CPU block will be alphacool XPX aurora Hpu block will be alphacool aurora acryl 3080 fe 3 fans will be eiszyklon aurora lux digital rgb 120 i still have 2 fractal...