Search results

It does work but I cant figure out when the flow rate is so abysmal, initially the flow tube was blasting water into the sides of the rez but now the sort of trickles down the flow tube .

Yea, when I turn off both eisbaer(CPU) and eiswolf(GPU) pumps there is no flow either way, VPP is plugged into fan header and into molex. When I was filling it it was pushing water fine up through 2 rads and both blocks, then 2 days after install I see supper low flow from the flow tube in the...

Hey, I just got the VPP apex pump with rez and my software reports that it is running at 3200 rpm but no water is moving, it is added to a loop with Eisbaer and Eiswolf AIOs ( removed all the old tubes and replaced with new tubes, and fittings) it seems that only the two AIO pumps are running...

I have Alphacool Eiswolf 2 AIO - 360mm and Alphacool Eisbaer Aurora 360, I am having issues with GPU overheating and clocking down to 300MHz, likely air ins system or low liquid. I wonder if there is a good way to sort of add a proper pump and rez for this setup with quick connects? 1. I am...

hahah if it only be that easy, no after further research these temps are normal the 5900x just boots as high as possible within given temp limits so 89 to 90 degrees is normal phenomenon.

So I have remounted the CPU block, I think I did it correctly. The threads bottomed out on the backplate and didn't go any further. However, the issue persists. the 5900x runs at 72 degrees Idle, opening chrome momentarily pushes it to 80 degrees. Meanwhile, in the same loop, the 3090 runs at...

Hello, I just got an Eisbaer Aurora 360 AIO and coupled it with Eiswolf GPU AIO, my GPU - 3090 is running nice and cool ( 45 idle, 70 in furmark) however the CPU - 5900x is supper hot 65 degrees idle and reaches 90 degrees in prime 95, around 80 degrees while playing in PUBG. I am pretty...

Ahaa excellent, than you very much this is exactly what I needed! Have a great day!

That's odd because I have a 3090 and I have those tubes and QDCs. See attached. But my question is - can I get an Eisbaer Cpu AIO with the same tubes and QDCs or is there only ones with kinck springs? Sorry if I'm being unclear.

Yes I understand that compatibility is fine, but I'd like the tubing and quick disconnects to have the same style and look and as I saw in the video (first screenshot) the Eisbaer AIO they are using has exactly the same style tubing and quick disconnect as the eiswolf I have now. However, I...

I see, thank you. And regarding the version with the same tubes as eiswolf, is this available to buy already?

Hello, I currently have a 3090 with an eiswolf AIO, and I'd like to add Eisbaer AIO on my 5900x. However, I can't find on how I'd connect them, how do I k ow which of the eiswolf tubes to splice in to Eisbaer AIO, what is the direction of flow? Additionally, all I see in store are these...

As you can see from the pictures the ram is about 6.5 cm away while the vrm heatsink is about 3.5cm. The issue is that in the proper position it is even hard to get a 140mm fan mounted. I currently have a 280mm aio but again it is mounted with 1/3 of the fins so far to the side that they are...

I have a 3800x but want to upgrade to 5900x in the future. However, my case phantex p400 does not support any additional rad mounts. I have a eiswolf in the front and the top mount is blocked by my memory modules. Would a 360 rad really not be enough, I do not do anything besides gaming or...

Hi, I recently purchased Eiswolf 2 AIO and it works great on my 3090, this has kinda made me curious to add my CPU into the same loop as it had quick-connect fittings on it. However, I am very new to water-cooling and the fittings/tubing sizes, compatible fluids... etc confuse me greatly...