Alphacool ES Reservoir 2U - DDC Version + Laing DDC pump 12V DDC 4.2 + Alphacool Laing DDC metal bottom - black nickel

[ZXSpectrum]

I am trying to utilise this combination however it appears as if the screws that are provided with the Alphacool Laing DDC metal bottom - black nickel to use with the decoupling set are too long. They bottom out in the Alphacool ES Reservoir 2U - DDC Version before the Laing DDC pump 12V DDC 4.2 with Alphacool Laing DDC metal bottom - black nickel is able to seal. The only way to fit this combination together is to use the M4x20mm Screws that come with the Alphacool ES Reservoir 2U - DDC Version and as such will not allow it to use the decoupling mount and has to be fixed with the 4 screws on the top of the Resevoir. Is there a decoupling kit that has shorter screws that will work for this combination?

Screw Length:

Fitted Together With M4x20mm Screws Provided with Resevoir

Fitted together with the decoupling kit provided with the DDC Metal Bottom


Any help would be appreciated.