Compatibility of D5 Core RAM cooler with DDR5 RDIMM

[Vatharian]

As in the subject - can I use the D5 DDR5 modules with LRDIMM/RDIMMs (Registered DIMMs, or server memory, they are different from desktop UDIMM modules, and pin-incompatible). The DDR5 RDIMM modules have pretty prominent VRM elements on the center of the module, with thickness of up to 2 mm on each side, with total thickness at the center of almost 5 mm.
I would like to attach them to D-RAM X4 block, They get pretty toasty (~10W/module), and with watercooled CPU there is very little air movement around the area, and I am running into memory throttling with heavier workloads.

And if not - are there any dedicated to RDIMM ones?

 

[Vanzin]

HI,

I am sorry but the DDR5 RAM coolers are not compatible with LRDIMM/RDIMMs.

 

[Vatharian]

Thank you!

Do you think it would be possible to mod the coolers, for examply by adding a shim to widen the distance between side plates and thicker thermal pads?

 

[Vanzin]

I am sorry but I can´t say, if it will be possible to modify the product. Something like this, will also void your warranty.

 

[Len Sowle]

HI,

I am sorry but the DDR5 RAM coolers are not compatible speakeasy speed test omegle LV with LRDIMM/RDIMMs.

why not compatible

 

[Vatharian]

why not compatible

Due to marked components - part of integrated PMIC. These components stick out 2 millimeters above PCB on each side, bringing total thickness over what D-RAM can accommodate - you can't slide the plates further apart.

 

[Vatharian]

I am sorry for resurrecting the thread, but has anything changed in last 1.5 years?
I believe Apex/Core line has been introduced since then, I remember seeing only D-Ram line of coolers.

 

[Eddy]

As we had no demand for coolers for this type of ram, we put the whole thing on hold and turned our attention to other projects. So no, nothing has changed.