Are they not working at all?but still no RGB on on Eisball
Pumps should be never runned upside down as the air will stay there. To drain the system you need go to the lowest point for example trough the radiator.Another issue is draining the loop. I have the ball mounted upside down and can’t figure out where to drain the entire loop from. I have tried draining from the “OUT” port on the eisball but it seems to only want to drain 50% of the reservoir.
I’ve been running the pump upside for two weeks with no issues. Also, when draining/filling I would turn it upside and still couldn’t drain from the “OUT” on reservoir. Should I find a way too mount right side up?Are they not working at all?
RGB’s are not working at all on eisball. Pump works fine.
Pumps should be never runned upside down as the air will stay there. To drain the system you need go to the lowest point for example trough the radiator.
That would be better really. You will get soon or late problems with the pump if you run it upside down.Should I find a way too mount right side up?