Hi all,
So i installed the Eiswolf 2 AIO for my KFA2 3090 SG (oneclick). Installation was quite easy, however i forgo to fit the blend of the gpu where the display cables are conntected and where the GPU is mounted to the case (apart from the PCI-E). So there was quite heavy sag on the GPU which i then supported with some things in order to keep it straight. When i then tried to remove the Card again in order to install the the bracket, i could not remove the card. The latch seems stuck and i can't push it down for some reason. Apart from the latch i can take out the card, but there it seems to be stuck. Due to the big cooler i can't reach the latch on the other side, so i'm stuck.
I mean, the system is running ok, and apart from coile whining in Forza Horizon 5 it is exactly what i wanted (a quiet solution for the 3090). i've now ordered a GPU support so that i have a proper way of reducing the sag.
I'm quite hesitant to apply force to remove the card because, as you know, it would be expensive and very hard to come by a new card. So maybe you know something that might help? i added some pictures where you can see the almost hidden "latch" of the pci-express slot.
I know it is not primarily an issue with the Eiswolf, however i would have probably go on about it differently if the manual had included also the mention to re attach the blend. I also missed a part on how to connect the pump and where.
So i installed the Eiswolf 2 AIO for my KFA2 3090 SG (oneclick). Installation was quite easy, however i forgo to fit the blend of the gpu where the display cables are conntected and where the GPU is mounted to the case (apart from the PCI-E). So there was quite heavy sag on the GPU which i then supported with some things in order to keep it straight. When i then tried to remove the Card again in order to install the the bracket, i could not remove the card. The latch seems stuck and i can't push it down for some reason. Apart from the latch i can take out the card, but there it seems to be stuck. Due to the big cooler i can't reach the latch on the other side, so i'm stuck.
I mean, the system is running ok, and apart from coile whining in Forza Horizon 5 it is exactly what i wanted (a quiet solution for the 3090). i've now ordered a GPU support so that i have a proper way of reducing the sag.
I'm quite hesitant to apply force to remove the card because, as you know, it would be expensive and very hard to come by a new card. So maybe you know something that might help? i added some pictures where you can see the almost hidden "latch" of the pci-express slot.
I know it is not primarily an issue with the Eiswolf, however i would have probably go on about it differently if the manual had included also the mention to re attach the blend. I also missed a part on how to connect the pump and where.