There will certainly be resellers in the U.S. that will offer the cooler - who exactly we can't say yet.
New Eisblocks for AMD Radeon RX 7900XT(X) GPUs
- Thread starter Christopher.W
- Start date
swenzzon86
New member
Hello!
What about Red Devil ? Any plans for waterblock ?
Loved my Alphacool block on my XFX 6900XT!
What about Red Devil ? Any plans for waterblock ?
Loved my Alphacool block on my XFX 6900XT!
Hi swenzzon,
The RX7900 XTX Red Devil is on our list, but it will take a while. Unfortunately, I can't tell you exactly how long.
The RX7900 XTX Red Devil is on our list, but it will take a while. Unfortunately, I can't tell you exactly how long.
swenzzon86
New member
I refuse to buy EK
Basicly all aib pcb look identical arround the gpu, only a couple of screws differ (what i can tell) maybe a waterblock from Sapphire nitro with some small modifications can fit ?
I would advise you not to make such changes. But if you are fit in the field you are free to try it out.
But note: A structural modification will void the warranty / guarantee.
Until the right cooler comes from us you would have to be patient a little longer
But note: A structural modification will void the warranty / guarantee.
Until the right cooler comes from us you would have to be patient a little longer
thecampster
New member
Any update on when the Red Devil water block will be available? That is one big ugly black blob in the middle of an all white build.
At the moment we can´t say when the water block will be available. With a little bit luck it can be pre-ordered by the end of march and delivery will be by the end April earliest. Maybe @Marc-eting or @Eddy can tell you more.
spartanash1
New member
Any ideas if there are plans to have a water block for the Gigabyte Gaming OC 7900xtx?
@spartanash1
I am sorry but we don´t have a water block for this GPU in our assortment and no interest to produce a water block for it.
I am sorry but we don´t have a water block for this GPU in our assortment and no interest to produce a water block for it.
Draculea
New member
I have the Nitro+ XTX waterblock and even with enough radiator surface 2x360 + 240 i still can't contain the hotspot to less than 90c.
The GPU temp is around 55-57 on hot days so that would be acceptable.
Tried re-mounting, re-pasting, re-cutting pads, nothing is improving my result.
Is this the result i can expect or something is wrong with my block?
The GPU temp is around 55-57 on hot days so that would be acceptable.
Tried re-mounting, re-pasting, re-cutting pads, nothing is improving my result.
Is this the result i can expect or something is wrong with my block?
nhtlquan
New member
