I have a question & request regarding the Alphacool HF 14 Smart Motion universal block ( https://www.alphacool.com/shop/gpu-...smart-motion-universal-copper-edition?c=20593 ): in description / technical specifications is stated that it support a flow of up to 5 l / min, which translate into 300 l / hour.
My pump (Alphacool Eispumpe VPP755) can put out about 340 l / hour at maximum speed - step 5, and 320 l / hour at step 4. I'm currently using it at step 3 (280 l / hour).
If the block is limited at 300 l / hour, it makes no sense to run the pump at maximum speed, right? Not even at step 4 (320 l / hour), since this will only create a heavy resistance to the pump. So my question (and request) for Alphacool is this: can I replace the cooling plate with a (homemade) plate that allows more flow? I haven't dismantled the block yet, so can you please send me a picture (or drawing) of the cooling plate, so I can determine if I can actualy make a new one?
Thank you for your support!
My pump (Alphacool Eispumpe VPP755) can put out about 340 l / hour at maximum speed - step 5, and 320 l / hour at step 4. I'm currently using it at step 3 (280 l / hour).
If the block is limited at 300 l / hour, it makes no sense to run the pump at maximum speed, right? Not even at step 4 (320 l / hour), since this will only create a heavy resistance to the pump. So my question (and request) for Alphacool is this: can I replace the cooling plate with a (homemade) plate that allows more flow? I haven't dismantled the block yet, so can you please send me a picture (or drawing) of the cooling plate, so I can determine if I can actualy make a new one?
Thank you for your support!