What do you want?

TonyW

TonyW

New member
Hi, was wondering if there are any plans to make a waterblock (or maybe there is one that fits) for the ASUS Radeon RX 7900 XTX 24GB TUF Gaming OC (MPN: 90YV0IG0-M0NA00)
I see that you have one for another ASUS card but that is for the reference pcb and probably wont work since the TUF Gaming OC have 3x8pin and not 2x8pin.

(have your 3080 aurora acrylic block for years now and i love it!)
 
Eddy

Eddy

Iceman
Staff member
Hi,
I'm sorry, but we will no longer be launching new coolers for the AMD RX 7XXX series. The next generation will be introduced this month. We will focus on that.
The TUF has a custom PCB design, that's right, the reference cooler doesn't fit on it.
 
sgtsixpack

sgtsixpack

New member
I would like to buy a Sapphire 9070xt nitro+ waterblock. Do you have the dimentions for that?

Edit: Changed my mind. Powercolor Red Devil 7090xt I want with 3 x normal PCIe power connectors.
 
Last edited:
Eddy

Eddy

Iceman
Staff member
We will only be able to provide information on the coolers for the new AMD cards when the official sales start. Before then, such information is subject to an NDA.
 
Abexa

Abexa

New member
That doesn't make any sense! The cards were all officially presented by the manufacturers. Only the tests of what they are allowed to do are only being published and I would now just say that the PCB is difficult. Then why can't you say earlier that there will be a water block for these and these cards?
 
Eddy

Eddy

Iceman
Staff member
It's quite simple. We have an NDA that states what is and isn't allowed and when. We don't care what other manufacturers do, that's their problem. They may have other NDAs or other agreements. That has nothing to do with us.
 
Eddy

Eddy

Iceman
Staff member
Everything that is official and confirmed can be found in the configurator or in the compatibility lists that are linked to all coolers. The lists are always up to date.
What we are not currently showing are coolers that are still under development. Because we simply have to check every time whether everything is correct and whether we are making the cooler at all.
 
T

thesilverpittie

New member
Looking to get a new water block and backplate for an ASUS Prime OC Radeon RX 9070 XT. Have a Radeon RX 6950 with the Eisblock Aurora on it with a Cape Cool 100mm reservoir, the VPP Apex pump and top, as well as radiators and fittings most of which is Alphacool. I love the quality and performance of your products and hope to see a new waterblock for my new GPU. And I have the Eisblock XPX Aurora on my 9800 X3D!!!
 
K

Kingdud5

New member
Personally, I'm looking for 2 things:
1. A block for any MSRP card (so the $600 9070 XT or $550 9070). Most of the youtube reviews I saw were with Sapphire cards, so maybe target that.
2. A block that is around $100. $200 for a block on a $600 card is a bad joke. *maybe* I'm out of touch and that's normal now, but 1/3 of the card cost seems excessive unless it's pre-mounted for me.

I'm an engineer, I'm building this for noise reasons primarily. I don't care about aesthetics at all. If black plastic is cheaper than clear acrylic, do that. I don't need RGB. I want the CPU core, RAM, and VRMs to all be cooled. Include thermal pads (generic catch-all term for 'something to bridge the gap if it's too thick for thermal paste) please. It MUST be copper. No aluminum on water-touching components. Don't cut that corner. I don't care about nickel plating.
 
M

Max2023

New member
Hello, i have a question, can u tell me if Alphacool Core Geforce RTX 5080 Reference with backplate is compatible the RTX 5080 VENTUS 3X OC WHITE ?
the web site just precise OC standard,
Thx
 
K

kequc

New member
To know which 9070 water blocks are being worked on. It's difficult to find one of these cards because they're selling out everywhere, but when I do have a chance to buy one I have to turn it down.

If I knew which ones will have a water block I'd know which one I can buy.. could I ask for a Sapphire Nitro+?
 
sgtsixpack

sgtsixpack

New member
kequc said:
To know which 9070 water blocks are being worked on. It's difficult to find one of these cards because they're selling out everywhere, but when I do have a chance to buy one I have to turn it down.

If I knew which ones will have a water block I'd know which one I can buy.. could I ask for a Sapphire Nitro+?
Click to expand...
Same dilemma I'm in although I have already made my purchasing decision, the Powercolor Red Devil 9070xt.
 
Abexa

Abexa

New member
Hello. I bought a Sapphire Pure 9070XT and need a block for it? Is one already in production? I would also provide my card, but I just can't find the PCB number. It would be nice if you also included example images in the form
 
M

MDeeb

New member
Hi,

I have purchased the Sapphire NITRO+ AMD Radeon RX 9070 XT GPU will you be making a water block for this card too?

Thanks in advance for any information you can give.
 
Taldren

Taldren

New member
I really need a waterblock for the PowerColor 9070 XT Red Devil. I have a torrent case, which isn't small by any means, and I still don't have room in it for the card with my rads and pump/res. Have the card dangling in the case by a extension cable right now.
No way was I going to buy the Tachi or Nitro+ with the 12v HP adapter of burning, so please, make this a liquid devil asap.
 
Z

Zabran

New member
I need a waterblock for the XFX Merc 9070XT OC please! I have calipers and can send measurements with some instruction.
 
You must log in or register to reply here.
Top