Recent content by Vanzin

Moinsen, die DDC310 kann nicht geregelt werden. Diese wird, wie fast alle DDC Pumpen, mit 12V über den Molex Stecker versorgt und gibt nur ein Tachosignal aus. Wenn du eine regelbare Version der DDC Pumpe verwenden möchtest, benötigst du die DDC 4.2. PWM. Welche die einzige DDC Pumpe ist...

This is the old XT45 420mm Version HPE Version

HI, Only the HPE radiators have 16 Channels (140mm Fan Version). All other radiators have only 12 Channels. You can also check it on the side panel, as I told you. If there is HPE written, it is a HPE radiator. IF there is nothing written you have a XT45 radiator. THe XT45 radiators were never...

HI, you can check it simply with the EAN code or when looking on the radiator. The HPE Series, has also a blue or grey HPE print on the side panel.

Hi, you can purchase the thermal pads, which are included to our water blocks in our Online SHop. https://shop.alphacool.com/shop/waermeleitmittel/waermeleitpads/waem-alphacool-waermeleitpad-ersatzset-fuer-nvidia-4000-series If you are suspecting that your GPU is affected with the GPu DIe...

Hi, Thanks for the information but depending from the information I can´t see any problems. The imprints is okay and the CPU is running within AMD specifications. As long as your CPU is not below the normal clock of 4,7Ghz, everything is okay. The boost clock will be hold till the temperature...

HI Thanks for the photos. THe imprints looks okay. Did you check the clock of your CPU, because AMD´s CPU´s are working different von Intel. THey are boosting until they are reaching the maximal allowed temperature of 94°C and from this point one, they will lower the clock to hold the...

HI, the higher the RPM of the fans, the more heat you can dissipate with the radiators. The same goes for the water flow, the more water flow you have, the faster can the heat be transfered. The air flow mechanic is the same as with air cooling. If you don´t remove the warm air from your case...

HI, Your CPU can reach under full load nearly 90°C. To check if the cooler has any problems, we will need a photo from the imprint of the thermal paste and did you check if the pump is running with 12V and shows a RPM of 2600 +/-10%? https://www.techpowerup.com/review/amd-ryzen-7-9800x3d/25.html

Hi, we are only offering the following R-T table for our 10K Ohm sensor. https://download.alphacool.com/legacy/kOhm_Sensor_Table_Alphacool.pdf

Die GPU Kühler Serie Eisblock Aurora und Core Serie unterscheiden sich nur optisch. Kühlleistung ist bei beiden Kühlern identisch.

HI, you can find all 3D files, which we are offering in our 3D Center. https://www.alphacool.com/en/3d-viewer-center

Moinsen, das kann ich dir leider aktuell nicht sagen.

HI, 70°C Hotspot are normal for such a overclocked CPU. Yeah, you are running the GPU with lower Voltage but you have rose the clock. Due the information in the screenshot, which you have provided, we can´t find any problem with the water block. If you are not happy with the water block, you...

Moinsen, wie bereits geschrieben, wirst du mit einer AIO, was die Eisbaer Pro ist, nicht wirklich glücklich. Das Problem ist, das diese Produkte entwickelt wurden, bevor die neuen CPU´s rauskamen und die ganzen Hotspots und CCD Positionen auf der GPU DIE versetzt sind und daher mit diesen...