Search results

Hi, both the AIO and the DIY cooler have been end of life for a long time and are no longer being produced. In fact, they’ve been discontinued for so long that I doubt you’ll be able to find any remaining stock at any retailer. Sorry, but at the moment I don’t see any options available.

Den mit Abstand besten Durchfluss haben die BLH1A Schnellverschlüsse. Also die ganze Serie. Aber was meinst du mit "Ich gehe auf einer Seite mit 10 Tüllen auf den Verschluss"? Oder meinst du 10mm Tüllen?

In short -> Nope, no issue ;)

Das kann ich nachvollziehen. Wie gesagt, in der Regel bieten einige Mainboards eigene Software an, die dir das alles wie gewünscht anzeigen kann. Ansonsten wüsste ich hier leider keine Alternativen.

We ourselves do not sell anything on Amazon, eBay, or similar platforms. Those listings are always from distributors or other resellers. RGB – 12V → 4-pin aRGB – 5V → 3-pin The linked 4-pin cable is not compatible with aRGB. I already gave you the item numbers you would need. I just can’t link...

Sofern es vom Mainboard keine entsprechende Software gibt, einige bieten das ja an, bleibt eigentlich nur Aquacomputer mit ihrer Aquasuite. Zumindest ist das aktuell der Stand der Dinge in diesem Bereich. Aber dann wirst du kaum um eine Aquaero herum kommen.

Basically, that would be item 18604 and most likely 18698. The latter is available in various lengths. However, I doubt that the issue is caused by the cables. I would rather assume that the LEDs are defective. A faulty cable is much less likely in this case.

The ES coolers also feature a jet plate. The internal design is almost identical to that of the Core coolers.

Moin, wir haben den Kühler selbst aktuell nicht auf Lager und bekommen diesen erst nächste Woche rein. Dann werden auch die Distributoren wie Alternate beliefert. Schneller wird es auch über uns in diesem Fall nicht gehen, zumal du bei Alternate stornieren und dann bei uns direkt bestellen...

Hi, regarding your first question, it’s difficult to assess. You could possibly try thermal putty, as it can go down to around 0.2 mm. However, I can’t say with certainty whether that would be sufficient in this specific case. The issue with LED-equipped modules or modules that deviate from...

Thanks for the pictures. Yes, this will not fit, as it is not a standard RAM PCB. Due to the LEDs and the control circuitry on it, these modules are not compatible with our RAM coolers. They are only compatible with standard RAM layouts. RAM modules with LEDs or a custom PCB are unfortunately...

Could you please take a photo of the RAM cooler from the front, or at least in a way that shows the entire surface with the logo clearly visible? And also one photo of the RAM PCB from both sides. We have been selling RAM coolers for a very long time, so I’m quite curious to see what the RAM...

Da würde ich aber mal ganz schnell die AIO ausbauen, die Lüfter abnehmen und mir das mal genauer anschauen. Und ja, ich meine die ganze AIO nicht nur die Lüfter abnehmen, so wirst du gar nichts vernünftig erkennen.

The cooler uses a jet plate system like all modern coolers. If you swap the IN and OUT ports, you can lose up to 10°C in cooling performance. You won’t damage anything by doing so, but the cooling performance will drop significantly.

Hi, in principle, that is the correct cable. Which motherboard are you using, and which exact header did you connect it to? Could you please link it or provide the exact motherboard model and the specific header designation? Ideally, to rule out any possible sources of error, a photo of your...

Nein, den gibt es nicht.

They are different coolers, so it’s only logical that there can be differences. The PCBs are not identical, and the coolers are not built in exactly the same way due to differences in water flow orientation, design, terminal layout, overall height, etc. The graphics cards listed are also not...

Hi, I have to admit that we occasionally run into a system error on our end. We’re working on it, but so far we don’t know why some customers are affected. In this case, please send an email to info@alphacool.com with all the information that is normally required in the registration form. We’ll...

No problem at all. I know all too well how easy it is to mix up numbers, I do that myself sometimes. I just wanted to make sure I hadn’t actually overlooked a mistake on our side that we would need to correct. All good.

Morgen, weder bieten wir einen passenden Kühler an noch werden wir einen für diese Grafikkarte machen. Wenn man definitiv vor hat eine Wasserkühlung aufzubauen, sollte man sich vor dem Kauf einer Grafikkarte informieren für welche Modelle es Kühler gibt. Das kann man im Konfigurator oder man...