Search results

The RTX 6000 ADA cooler from your order is currently out of stock and will likely not be available before the end of February — possibly even later. Unfortunately, you will either have to continue waiting or consider an alternative solution.

we do not offer caps of this kind for reservoirs. Demand for reservoirs without a pump has also dropped to almost zero. In the future, there will hardly be any reservoirs that do not have a pump mount. Unfortunately, I cannot help you with this, sorry.

A shipment of the cooler is expected to arrive by the end of next week. However, at the moment it looks like so many pre-orders have already been placed again that customers who order now will likely not receive one.

I can’t say that off the top of my head right now, and at the moment I also don’t have any way to check it again. Your best option would be to ask our support team at info@alphacool.com. They will probably have to check with the development department as well. I honestly haven’t had this...

The main issue with server motherboards is that the spacing between the slots is much tighter than on standard consumer motherboards. As a result, the coolers do not fit in between the slots. In addition, the water blocks on top also won’t fit, as the screw spacing no longer matches. If your...

@akosmaroy The standard DDR5 coolers also fit RDIMM variants, as there are no technical differences in terms of dimensions. This thread was about the 8-slot RAM cooler and its further development. The regular DDR5 coolers can also be used with RDIMM modules.

Hi, sorry, but the cooler for this graphics card has been end of life for quite some time and is completely sold out. You won’t be able to find a cooler from us anymore, except possibly on the second-hand market. It is, by the way, the reference layout, if that helps — so no special PCB layout...

Solange du zufrieden bist (y) Das Ganze ist schon ein bisschen verrückt mit dem Fass und zwei mal 1080 Nova. :ROFLMAO: Dann wünsche ich noch viel Spaß damit.

It looks almost 1:1 like the Vanguard layout. At least I can hardly spot any differences. It’s possible the cooler with article number 10265 could fit. Based on the pictures, I don’t see any reason why it shouldn’t — but this statement is without guarantee.

The standoff is really only there to ensure the correct height, nothing more. Nothing will happen if you don’t use it. In general, all PCBs have protection around the screw holes, usually copper-colored. Even if you were to apply electrical tension to it artificially (a low voltage), nothing...

Wie gesagt, das mal an einem Kühler etwas nicht perfekt ist, kann ich nachvollziehen. Aber drei Stück hintereinander..... dazu fällt mir nur das Wort "Krass" ein.

Thank you for the pictures. Is the screw really 4 mm in length? I mean the thread without the head. It’s possible that the screw is indeed too short. This should of course not happen, but when several thousand screws are produced in one batch, it can occasionally occur that one is manufactured...

Am Ende aber EPDM ;-) Was den Core Kühle betrifft, du hast nicht zufällig Bilder? Das man mal Pech mit einem Kühler hat, kann immer passieren. Aber drei mal hintereinander.... :oops: Das nenne ich mal super viel Pech. Die Kühler sind in der Regel Perfekt. Aber was meinst du mit eloxierter...

You don’t have to fill a system from the top. Normally you simply fill it through the reservoir and then run the pump to push the air out. You can tilt the system back and forth while doing this. You don’t need to turn it upside down. Of course, you can control the pump via PWM using the CPU fan...

We do not offer separate I/O shields for graphics cards. I don't understand the issue with the screw. Unless you actually received a model with an incorrect screw, it shouldn’t be too short. If it is the correct screw, then it cannot be too short unless something went wrong during installation...

Da muss ich dich enttäuschen, wir haben nichts mehr herum liegen. Schick doch mal bitte ein Bild, wie das Ganze bei dir aussieht. In der Regel sieht es meistens schlimmer aus als es ist.

We currently do not offer any coolers for KFA models, so we won’t be able to help you with that. Since KFA is only present in a few markets, it is rather unlikely that we will produce coolers for these graphics cards again.

Ich verwende selbst TPV Schlauch. Eigentlich sollte mein aktuelles System wieder HardTubes bekommen, aber am Ende war ich einfach zu faul. Dann wünsche ich dir mal viel Spaß mit deinem System. Also, wenn du es fertiggestellt hast. :)

Die Schrauben sind eloxiert, richtig. Und es ist offensichtlich, dass dies bei der Eloxierung passiert sein muss, also während sie im Bad drin waren. Eigentlich unmöglich, aber hier ist der klare Beweis, dass es doch möglich ist. Aber immerhin könntest du den Kühler jetzt montieren. Kurios...

If you have any questions, just ask. But when it comes to choosing the parts, I can’t help you much—everyone has their own personal taste in what they like or don’t like. Still, I’m glad you like the builds. The newer parts look great too… the older ones… well… let’s just say the newer ones are...