Search results

Hi, did you get answers to your email now?

Is in progress! But it's actually not difficult either. :-)

Schreibe bitte eine Mail an unseren Support (info@alphacool.com) & verlinke den Beitrag. Da bekommst du schnell Hilfe & Infos über die weitere Verfahrensweise.

The picture is an assembly example. We used icicle fittings and normal connections. You use the extensions I recommended in the same way and couple the active backplate between the radiator and the cooler. This is the quickest and easiest way.

I assume that someone spilled a little solder here while soldering. This has no technical disadvantages. Have you already had the radiator in the circuit? Was/is it leak-proof? As already written, if this bothers you, you have to write an email to our support. (info@alphacool.com)

Sure, here we go.. ;-) https://www.aquatuning.de/water-cooling/kits-systems-and-aios/spare-partsaccessories/26889/alphacool-eisbaer-tpv-extension-kit-tube-and-fittings?c=362 or...

Schottverbindungen bieten die Möglichkeit, den Wasserkreislauf mit externen Kühlsystemen unkompliziert zu verbinden. Alphacool präsentiert heute zwei neue Schottverbindungen mit Schnellverschlusskupplung, mit deren Hilfe und in Verbindung mit den bereits bekannten Alphacool Schnellverschlüssen...

Bulkhead connectors enable the uncomplicated connection of the water loop with external cooling systems. Alphacool today presents two new bulkhead connectors with quick release coupling. With their help and in combination with the already known Alphacool quick connectors, it is possible to...

-> with the aid of another extension set with quick-release coupling (see assembly example). Output GPU->Input Backplate->Output Backplate->Radiator The pressure builds up automatically during filling, but should not exceed 0.8 bar in the entire system.

The easiest way is to integrate a stronger pump into the system, e.g. a D5 pump with a corresponding reservoir. As already written, this would be quite simple via another extension set with quick-release coupling. The DC-LT pump of the Eiswolf 2 AIO will not be removed & you can keep it running...

Welche Karte hast du? Hast du die Kompatiblität im GPU-Konfigurator geprüft? -> nein musst du nicht. Die aktive Backplate ist eine sinnvolle Ergänzung, um die Temperaturen weiter zu senken. Im Regelfall genügt der Kühler schon. So wie sich das aber bei dir anhört, liegt das Problem mit...

Gerade bei den Eiswolf 2 Modellen für 3080/3090 ist die aktive Backplate eine sinnvolle Ergänzung! Was ist denn eine "alte AIO"? Für welche Karte? Ich frage mich gerade, was für eine aktive Backplate du da verbauen willst?

Please email our support at (info@alphacool.com) and link to this post. There you will get fast & uncomplicated help.

Schau mal bitte in deine PNs. VG Thomas

Yes, an adjustment is possible - but right up front, for warranty purposes it will be a bit tricky, since you are making structural changes to both AIOs. On the whole, your project is quite uncomplicated. You can use the fittings again. When removing them, you just have to make sure that you...

There is no Eiswolf 2 for your card. It is possible to convert a standard AIO to the cooler, but we do not recommend it. It takes a lot of skill, the warranty of the AIO expires & you have a cooler left over. From a price perspective alone, it makes more sense to create a custom loop for your GPU.

Marvel 😍😍😍

You will definitely need more coolant! Among other thing is, you have to fill the active backplate ;-) Our Tec Protect 2 is well suited for this. You can fill the circuit at the fill port of the Eiswolf 2 radiator.

Hi, Please have a look at my post before yours! ;-)

Wie Eddy schon schieb, die Abdrücke sind immer noch nicht ideal. Bitte schreibe den Support an & verlinke gleich deinen Beitrag der Einfachheit halber.