Ok, thanks for the information! Next question on the way to clarification: Why or for what do you use the quick-release couplings? They are outside the case, right?
You definitely hear it when a pump runs dry! It was important to me to point out that this has to be taken into account when setting up. Based on your picture, we have already been able to clarify that it is OK for you. Ultimately, there can also be other reasons why a pump goes defective. As...
Normally, the VPP755 pump should handle this reasonably well.
However, I can't tell you exactly because I don't know what other restrictions your system offers ;-)
I would try it & if necessary you have to install a second pump.
I misspoke a bit... the connections on the radiator are already OK. I was more referring to the fact that you have to make sure when setting up that the pump cannot run dry.
You could shorten the tubes and install new fittings (or carefully remove the old ones and reuse them, but this is not...
Hi, this may be due to the fact that we are sometimes minimally slower or even equally fast with normal shipping within the EU. For this reason, the particularly high costs for express shipping in relation to the transit time are not justifiable & we also do not want to impose it on the...
Hi, I wouldn't try all that at all. It's too much tinkering without any certain success. If you're unlucky, you'll end up investing more than with the solution already mentioned!
Just use one of the coolers already mentioned in combination with the Eisstation DC80 AIO Power Unit & another...
Right, my mistake! You are right. I was just looking for a possible cooler! Very stupid of me! You are of course right about the cooler, it already contains the pump! And the exchange with the cooler recommended by me, of course a pump is missing!
Finding an M02 cooler will be difficult, if at...
Wann hast du die Pumpe denn gekauft? Starte doch eine RMA bei EK? Wenn du eh eine neue Pumpe besorgst & austauscht wird dein System im Falle einer nötigen Einsendung ja dann auch nicht still stehen müssen.
Ok, let's wait and see what the support says. The position of the radiator with the connections facing downwards is really very unfavourable. There is always the danger that the pump can run dry (if you don't notice it)! And that would really be the death of the pump!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.