Search results

HI, I am sorry but we don´t have a compatible water block for this GPU in our assortment. The linked water block is only compatible with the MBA GPU´s and your GPU is using a custom layout.

HI, you can find the needed thickness in the manual. You will need 1mm and 3mm pads. https://download.alphacool.com/manual/13462_Alphacool_Eisblock_Aurora_Geforce_RTX_4090_Strix__TUF_with_Backplate_Manual.pdf HOw many you have to purchase I can´t say, since I don´t know the dimension from Gelid.

Hi, this is a known problem and our IT is currently on it to fix our Shop. Please try again later.

Hi, since the pump is working, you just have to maintanance your system. When the cooling capacity drops it is normally a indication that the copper fins are clogged and the heat is not transferred anymore. This can be simply fixed by cleaning the system.

HI, I am sorry but we don´t have any information about the used PCB Layout of this GPU. If you send us a photo of your GPU without the original cooler we can check if we have a compatible water block in our assortment. Please note that removing the original cooler will void your warranty in...

HI, The Core 1 water block should be mounted as shown in the manual, to have the best cooling capacity. IF you rotate the water block, the inner mechanik doesn´t align with the CCD,which will cause higher temperatures.

Hi, the mounting of the radiator is not the problem. Did you check, if the pump shows any RPM in your BIOS and if yes, how many RPM does the pump shows? Did you also maintanance your system? Meaning refilling the system or replacing the liquid?

Moinsen, bitte wende dich an unseren Support bzgl. einer RMA. Du kannst den Support unter info@alphacool.com kontaktieren

HI, I am sorry but we donßt offer customize products. If you want a smaller radiator, you have to purchase one separately and replace it by yourself. Please also note that we at least recommend a 360mm radiator to handle the heat from the GPU.

HI, I am sorry but we can´t see the PCB on these photos. As I have told you, we would need a photo of your GPU without the original cooler.

HI, you can rotate the water block as much as you want, as long the IN and OUT are connected correctly.

in this case, you have to contact us directly under info@alphacool.com to start an RMA.

Moinsen, bitte wende dich bzgl. einer RMA an die info@alphacool.com, die werden dir alles weitere mitteilen und wie das vorgehen ist. ICh habe auch aufgrund der DS-GVO persönliche Informationen wie deine Bestellnummer dem Post entfernt.

HI, I am sorry but it isn´t recommend to switch the IN and OUT since it will decrease the cooling capacity and water flow by a lot. Please use the IN and OUT as shown on the water block.

MOinsen, dicke Schläuche bringen außer mehr Wasser im System nichts, da der Durchfluss von den Anschlüssen limitiert wird.

HI, I am sorry but we don´t have any information about the used PCB Layout of this GPU, since it is normally already a water cooled GPU. You can either send us a photo of the PCB so that we can check it or you can compare it by yourself. THis PCB is compatible with our water block...

Moinsen, leider können wir auf deinen Fotos das PCB Layout der GPU´s nicht sehen. Daher ist eine Überprüfung anhand dieser Fotos nicht möglich. Wir würden Fotos vom PCB der GPU benötigen um etwas abgleichen zu können. Dies ist das PCB Layout, welches uns direkt von ASRock zur Verfügung gestellt...

I have answered you already in your other post. Therefore I will close this Thread. Please don´t double post.

Hi, we are recommending to tighten the screws handtight. This should be around 1-1,5nm

HI, I am sorry but we don´t have any information about the used PCB Layout of this GPU. IF you send us a photo of your GPU without the original cooler, we can check if we have a compatible water block in our assortment.