Search results

I am afraid there is not much you can do except replace the flow indicator. At best, you can try setting the pump to maximum speed and hope that the indicator starts spinning again. After that, you can turn the pump back down. Either the axle has somehow become jammed, or something has gotten...

@CfYz_R The compatibilities for the monoblocks are always clearly listed as soon as they are available. And why should we list where it does not fit? Judging by the pictures, the monoblock could actually fit. That would be the first time that a monoblock fits two motherboards with different...

The single-slot water block is not compatible with your graphics card; only the 1.5-slot water block will fit. Please be careful, as there are three different RTX Pro 6000 Blackwell graphics cards, each requiring a different water block. The fan configuration shown in the linked pictures of...

@Crowsoda There is no way to purchase our products directly from us if you are ordering from the United States. We currently do not accept direct orders from the US at all. I have already provided you with this information. What exactly would you still like to know?

@iParky86 No, neither of the two water blocks—the one for the ASUS TUF RTX 5070 Ti nor the one for the ASUS Prime RTX 5070 Ti—is compatible with the ASUS ROG Strix RTX 5070 Ti. Unfortunately, we will not be making a water block for this graphics card. Sorry.

Wie "stark" eine Pumpe ist, erkennt man nicht am Durchfluss sondern an der Föderhöhe. Die liegt bei der Apex bei 4,25m und bei der DDCZero bei 1,42m. Eine DDCZero bei 90% kommt nicht annähernd an die Leistung einer Apex auf 60%.

@CfYz_R Many PCBs look very similar or almost identical in pictures, but they are not. So far, we have not come across a single motherboard with an X870 chipset whose PCB layout was identical to that of an X870E motherboard. The differences between motherboard PCBs are even greater than those...

No emails have ever been ignored or left unanswered. If anything, the replies may have ended up in the spam folder, or the email address may have been entered incorrectly. And why should any of this suddenly be outside the warranty?

I’m not going to provide information here about when specific products will arrive at particular US distributors. That is handled by our sales department in coordination with the distributors themselves. I also can’t tell you which retailers in Europe still ship to the US because I simply don’t...

One email or support ticket is enough. Your email is already in our inbox, so everything is fine. The more emails and tickets you submit, the further back in the queue your request gets pushed. This doesn’t help—it only causes further delays. However, no one on our team works on weekends...

We only had V2 available here to scan. We’re not familiar with the first version, so we can’t list it. Therefore, I can’t tell you whether the cooler fits the first version of the card without seeing photos of the PCB.

The Eisbaer Aurora is not an ideal AIO for a Threadripper. The cooler base, or rather the fin area, does not cover the entire CPU. It can certainly be used for Threadripper, but not for variants with almost 300 W of heat output like your CPU. For that, you would have needed an Eisbaer Pro, as it...

Hi Jonathan, The cold plate still looks great, actually—I was expecting something much worse. Yes, a few fins are bent, although I have no idea how that could have happened, but it won’t have any noticeable effect on cooling performance or flow rate. You can safely ignore it. Just don’t try to...

Sorry, we do not sell a replacement cold plate. Can you show me a picture of the cold plate? In most cases, it looks worse than it actually is.

We no longer offer coolers for either of those graphics cards. Both have been end of life for quite some time and are no longer being produced. Unfortunately, I cannot offer you anything for them anymore.

Ach, schnell zu fahren ist auch nicht mehr das, was es mal war. Ich mag nur die Beschleunigung sehr. Oder eben dieses Klientel, dass gerne bestimmte Autos fährt, ein bisschen zu ärgern. Die Gesichter sind immer spaßig. Aber bei schönem Wetter ist mir mein MTB viel lieber für fast alle Strecken...

We do have fittings with a diameter below 17 mm, but they are all fittings for tubing smaller than 13/10. Unfortunately, we do not have anything suitable among the extensions. The one series that would have fit is unfortunately no longer available.

You need a fitting with a maximum diameter of 17 mm. Otherwise, you will not be able to screw it in at that position. The HF fittings are too large in diameter, so the fitting cannot be screwed in properly. In that case, the O-ring cannot seal correctly. You should look for a 10 or 20 mm...

This is an error in our shop. We have been working on fixing it since today. Please try again later today or tomorrow. I have no idea what went wrong, but it is very frustrating.

I have personally built or tested very few systems using two pumps, so I cannot give you as definite an answer as I would like. However, I do not recall there being any noise-related advantage to positioning the pumps differently. Therefore, I would say it does not really matter how you arrange...