Search results

The dc-lt should be fine for this, but it will struggle without any help if there is an airlock. Adding an extra pump would work, but also will manually manipulating the cooler. This isn't always easy to do though as it's like one of the marble mazes on occasion and unless you get it to the...

Hi there, The PCB looks like the standard 1080Ti/Titan X version, BUT it does look like it has additional headers for lighting. Due to this, we can't say that it would be compatible with any amount of certainty. We have not tried this block with this card. That block from us IS compatible...

Hi Sam, hmmmm, interesting! the thread is certainly longer! The easiest way would be to use spacing rings like these: https://www.aquatuning.co.uk/water-cooling/fittings/spacing-rings/6880/spacer-rings-2-pieces-x-5mm-silver-nickel-plated?c=2670 These are very simple and simply slot over the...

That's sorted and product on the way to you :) I will create the video showing how to top up an Eisbaer LT very soon, I am a little bit behind on some work at the moment but I am catching up slowly. As soon as I can I will get this live.

@uniquity, all of the photos we have taken at the same time, so all of the photos we have taken will all be like this if they were taken by us and also they will be like this if they were from the first batch that we created as the connectors are incorrect it seems. So moving forward - in the...

Hi there, 1- Hmmmm I am not sure that we do actually make an adapter to mount the Eisstation as you would like, although it shouldn't be hard to make on if you wanted.The Eisstation does have many mounting hole locations so a very simple bracket should suffice. Do be careful of blocking the...

Hi Cyrus, We would always say that you should follow the manual. This orientation ensures that the pump does not run dry if the fluid levels drop. If the pump runs dry, it will, unfortunately, damage itself as the pump uses the fluid for its own lubrication.

I would try it how you have it already, each Eiswolf Pro has a pump as well as your Eisbaer so that is 3 pumps running. The 5 fans worth of radiators for 3 pieces of hardware should be sufficient. Are your current temps high or are you more just thinking of the future?

Hi Svenh, I will look into this in more detail for you, I usually run the pump on 1 and the fans on two when it is like you have, however this should still get you into bios even if it wasn't working. Have you tried to boot the system with either a different cooler? The easiest way to check...

Your o-ring is on the way to you and we will take steps to make sure that future orders of this product will include them :)

Hi Jeremy, I replied to your PM too, but we will figure this out for you ASAP :)

Hi Ubiquity, I can only mirror the apologies of a late reply, I said I would take charge of this post and then I had to leave the office on an emergency and couldn't reply. I will make a video either today or tomorrow showing how to top up the Eisbaer LT too, but first, if you could send the...

Hi, Most pump headers on motherboards run the pumps at 100% and are not controllable. This is due to some other AIO units not spinning up unless it has a 100% signal so they fail. Some motherboard brands do allow you to control the header (sometimes in bios, sometimes via software) but I am...

Hi, can you take some pictures of what you have done please (a video would be even better) so we can further understand what is happening? If you have just attached a reservoir via quick disconnects, you may not see the fluid running, but try putting your hand on the Eisbaer LT block or listen...

Hi NocoOne. For overclocking on a 7980XE, it really does differ from chip to chip and you may not even hit 5Ghz stable regardless of what cooling you use, unfortunately, that is the silicone lottery that we play with! I have a single radiator 360 for my 7980XE but I only put it to 4.6GHz at...

Looking good!

4mm should be fine as you have the 10mm of the internal acrylic too. I once used 2.8mm as a lid to a reservoir with G1/4 ports. the thread on the fittings went past but still held :)

Hi Creative - Dave here, I started life in the industry as a modder and PC builder sponsored by many companies (including Alphacool!) Distro plates are a great idea for reducing the need for complicated tube runs and/or to get that visual look you want to create. Your idea will work as long as...

All those rads! Good choice!

Great looking build! <3