Hi guys,
Now that i have installed the loop and i could play a little and do some benchmarks, i will share my experience with you.
Find attached images with the installed loop and benchmarks results.
I have to mention that i am verry happy with this custom loop and my graphics card max temperature after hours of playing Call of Duty Black Ops Cold War, was 63 degrees Celsius *considering that the room temperature is 25 degrees Celsius and.... (yea i need an AC) that my graphics card is OC'ed +100 Core clock and +400 Memory Clock (Maxxed Power / Temp limits - see pictures attached)
It runs with an i9 10900k 5.0GHz and Resizable BAR enabled.
And most important i have to mention that 1 thermal pad needs to be thicker *instead of 1mm should be 1.5mm - See attached picture
To fill up this gap, i have used some from the original GameRock cooler thermal pad. *Temperature can be improved with the right thermal pad thickness
This is valid for Palit RTX 3090 GameRock (i don't know for the others if it is the same problem)
So yea, as i said i am happy with the results, the card can be pushed even harder but i have no need for that now.
The installation of the loop it is a little tricky but yea... worth the effort.
I have 2 intake 140mm fans, and 1x140mm + 3x120mm exhaust fans in an Asus TUF Gaming GT501 closed case.
The installation of the fans as i said above, pulls the air through the radiator. (so at the intake is the Radiator First and then the fans; at the exhaust from top to bottom, first the fans then the radiator)
The pump is extremely silent and does a great job and i hope it will keep it this way
This is it guys, and i want to thanks to Thomas for what he did and for this recommendation of the custom loop.
Keep doing good work
Wish you all a great end of the week!
Stay safe