Search results

  1. I

    Alphacool Eisblock Aurora Acryl RX 7900XTX/XT Taichi/Phantom missing standoff and scratches

    Nop dont use that buy PTM 7950, this is the only thing that will help you....ANY paste will pump-out or burn on 110C and such pressure...
  2. I

    Alphacool Eisblock Aurora Acryl RX 7900XTX/XT Taichi/Phantom missing standoff and scratches

    Sadly i received that same block for Taichi with scratches and chopped acrylic standoff... so heads up team, please make sure quality control is better in the future...
  3. I

    Eiswolf 2 Rx7900xtx tiny bubbles

    That is ok dude! P.s that bubble is your new spiritual animal, it will not go away! : D
  4. I

    RMA - Q/A

    For a reasons like this i posted this topic - I believe the company can do more to help out its customers as the process can be quite problematic.. https://forum.alphacool.com/threads/returned-shippment-not-accepted.4788/#post-27162
  5. I

    XFX 7900XT merc 310 high junction temperature

    After many ups and downs, i received a replacement of my ASRock XTX Taichi AIO block, i would like to say that i switch to PTM 7950 and i am happy for now - @ 465W - 88 Hot spot / 69C board. That is for first time for more then 1 year of issues... - Taichi fans are crap, the first one start...
  6. I

    RMA - Q/A

    Hi all, I was advised to RMA my GPU AIO, few questions as the web site is way too slow, and i get response for Info@alphacool, every 4-5 days... 1. Do i need to use the original package of the AIO or just a safe one? 2. There is two documents i need to include inside the box the RMA request...
  7. I

    XFX 7900XT merc 310 high junction temperature

    My AIO just got chips in it, so i am filling a report with Alphacool...in case they send me a replacement i would start with Honeywell PTM7950...paste for the AIO is waste of time and no good....
  8. I

    XFX 7900XT merc 310 high junction temperature

    I have XTX ASRock Taichi with AIO Block - i have the following results after re-pasting with Noctua H2: Idle - 33C board / hot spot 36C on 23 ambient temps. Load 100%, + 15% power limit /455W~/- CP2077/RDR2, or OCCT test - 72C Board / 92C hot spot. *This is my best achievement up-until...
  9. I

    Issues with https://shop.alphacool.com/en/shop/ for rest of the EU

    Hi all, I have an issue accessing the https://shop.alphacool.com/en/shop/ from Bulgaria currently, a Greece friend is in the same situation, but when i use VPN and access it from Netherlands, i dont have a problem? @ Alphacool?
  10. I

    Always measure your GPU height to choose the right thermopads thickness!

    I have high temps(on hot spot only) 95C++ on high loads only - CP27 etc. Most ppl with waterblocks dont have that problems...
  11. I

    XFX 7900XT merc 310 high junction temperature

    I have proper 1mm and 3mm for the PCB, propely installed according to the manual. (Exactly followed as a good German!) I would like to change the paste of the GPU only. To this - https://www.thermal-grizzly.com/en/products/516-minus-pad-extreme-en The minus pad extreme is electrically...
  12. I

    Always measure your GPU height to choose the right thermopads thickness!

    Hi Vanzin, If all that small details where in our manuals, we would not blame at Alphacool right a way, but seek a solution right? We are all reasonable people here...I spend hours investigating why i have high hot spot temps, without understanding what is going on... The worst is all solutions...
  13. I

    XFX 7900XT merc 310 high junction temperature

    @blackwell1988 @DirtyAlpaca I have, some 0.5mm Thermal Grizzly Extreeme, around here. Can i use it directly for the GPU hot spot...? Some of the ppl here use paste again, some of you use 7950 Honeywell...I am confused, lots of ppl on youtube state that pads are bad for CPU and GPU's...
  14. I

    Alphacool Eiswolf 2 AIO - 360mm RX 7900XTX/XT Taichi - Phantom with Backplate - high hotspot temps

    Hi Vanzin, Thanks for your response, but would you please revert back on point 1 and 4...?
  15. I

    Alphacool Eiswolf 2 AIO - 360mm RX 7900XTX/XT Taichi - Phantom with Backplate - high hotspot temps

    Hi all, I have a ASRock Taichi 7900 XTX OC and i would like to see if anyone resolved the issue with the - 1/ high delta between gpu temp and hotspot, in my case its 30C ~. 2/ On CP 4k ULTRA RT - i get up to 105C hot spot, and i am not happy with it... Questions for the tech support: 1. In...
  16. I

    XFX 7900XT merc 310 high junction temperature

    HI, I have 7900XTX ASRock Taichi - i am using the card since late Jan.23'. with Alphacool Eiswolf 2 AIO - 360mm RX 7900XTX First 2-3 months all was good /80-85C/ but eventually i came to 100-105C on the hot spot. / Cyberpunk RT 4k Ultra / I was using the exact instructions from AlphaCool how...
  17. I

    XFX 7900XT merc 310 high junction temperature

    I support the idea to test the video cards on game like Cyberpunk 2077 - the only title i have that can really push 420W out of my ASRock 7900XTX card. Second step would be for AlphaCool to create a 4k detailed (slow and nice) step by step video how they put the card together! That will resolve...
  18. I

    XFX 7900XT merc 310 high junction temperature

    Before i start i hope i can use that thread otherwise i will start a new one... Alphacool Eiswolf 2 AIO - 360mm RX 7900XTX/XT Taichi - Phantom with Backplate I am reading all this, and i am shocked... I have 7900XTX Taichi and temps on Cyberpunk are 95C on HotSpot and GPU cur temp is 60C...
  19. I

    Alphacool Eisbaer 360 with AM5 support?

    Yep i had the same questions and issues, when i was looking to buy AM5 cooler. See for example when its not listed on the site customers tend to wonder around. I would give as an example - Arctic cooling solution is specially made for the AM4/AM5 new hot spots. 3D cache is slightly moved...
  20. I

    Alphacool Waterblock/AIO for 7900XT/XTX planned ?

    I was wondering for the same thing but for Taichi. I had other issue - on the back my 3mm pad was not enough in the package i received. The one that are small squares recevied vs what was shown on the manual..Anybody? Second problem i have is the temperature of the liquid...I cant figure out...
Top